Low

LINEAR TECHNOLOGY  LTC2604IGN#PBF  数模转换器, 四路, 16 bit, 串行, 2.5V 至 5.5V, SSOP, 16 引脚

LINEAR TECHNOLOGY LTC2604IGN#PBF
Technical Data Sheet (301.39KB) EN 查看所有技术文档

图片仅用于图解说明,详见产品说明。

产品概述

The LTC2604IGN#PBF is a quad 16-bit rail-to-rail voltage output Digital-to-analog Converter (DAC) has separate reference inputs. It has built-in high performance output buffers and is guaranteed monotonic. This part establish advanced performance standards for output drive, crosstalk and load regulation in single-supply, voltage output multiples. The part uses a simple SPI/MICROWIRE compatible 3-wire serial interface which can be operated at clock rates up to 50MHz. Daisy-chain capability and a hardware CLR function are included. It incorporates a power-on reset circuit. During power-up, the voltage outputs rise less than 10mV above zero scale and after power-up, it stay at zero scale until a valid write and update take place.
  • Guaranteed monotonic over temperature
  • Individual channel power-down to 1µA, maximum
  • Ultralow crosstalk
  • High rail-to-rail output drive
  • Double-buffered data latches
  • Pin-compatible

产品信息

分辨率 (Bits):
16bit
采样率:
-
输入通道类型:
串行
电源电压范围:
2.5V 至 5.5V
ADC / DAC 封装类型:
SSOP
针脚数:
16引脚
数据接口:
串行
工作温度最小值:
-40°C
工作温度最高值:
85°C
封装:
每个
产品范围:
-
汽车质量标准:
-
MSL:
MSL 1 -无限制
SVHC(高度关注物质):
No SVHC (17-Dec-2015)

查找类似产品 按共同属性分组

应用

  • 消费电子产品;
  • 通信与网络;
  • 自动化与过程控制;
  • 传感与仪器;
  • 测试与测量

法律与环境

潮湿敏感级别:
MSL 1 -无限制
原产地:
Malaysia

进行最后一道重要生产流程所在的国家

RoHS 合规:
税则号:
85423990
重量(千克):
.0002