Low

PICO TECHNOLOGY  TA041  示波器探头, 25 MHz, 差分, 700 V, 10:1, 100:1, All Makes & Models of Oscilloscopes

Technical Data Sheet (397.61KB) EN 查看所有技术文档

图片仅用于图解说明,详见产品说明。

PICO TECHNOLOGY TA041
PICO TECHNOLOGY TA041
PICO TECHNOLOGY TA041
360°

产品概述

The TA041 from Pico technology is a 25MHz differential probe. This probe complies with IEC-1010.1, IEC-1010.2-031 CAT III and Pollution Degree 2 standards. This differential probe extends the measurement capability of oscilloscopes to electronic power converters, inverters, motor speed controls, switch mode power supplies and many other applications. This probe is designed for carrying out differential measurements between two points on circuit under test. It is not intended for electrically insulating circuit under test and the measuring instrument.
  • Differential input voltage of ±700Vrms (1/100) and ±70Vrms (1/10)
  • -3dB bandwidth is DC to 25MHz
  • 1:10 or 1:100 switchable attenuation ratio
  • DC accuracy is ±2%
  • Rise time is 14ns
  • Input impedance is 4Mohm
  • Ambient temperature range from -10°C to 40°C
  • CMRR is typically -86dB at 50Hz and -66dB at 20KHz
  • Common mode input voltage is 700Vrms
Do not use this probe above 1000Vrms (CAT III) between each input lead and earth or between two input leads to avoid injury..
Ensure that the probe output lead is grounded before making connections to input leads of probe.

产品信息

示波器探头功能:
差分
带宽:
25MHz
输入电压最大值:
700V
测试探头衰减:
10:1, 100:1
用于:
All Makes & Models of Oscilloscopes
产品范围:
-
SVHC(高度关注物质):
No SVHC (17-Dec-2015)
安全类型:
CATIII

查找类似产品 按共同属性分组

应用

  • 测试与测量

注释

Ensure that the probe output lead is grounded before making connections to input leads of probe.

法律与环境

原产地:
Taiwan

进行最后一道重要生产流程所在的国家

RoHS 合规:
税则号:
90309085
重量(千克):
.65

类似产品

查找与此产品功能相似的产品。选择以下某个链接,您将进入一个产品组页面,其中显示了所有具备给定属性的此类产品。