ADA4841-2YRMZ-RL

ADA4841-2 is a low power, unity gain stable, low noise and distortion, rail-to-rail output amplifier that has a quiescent current of 1.5mA maximum. In spite of their low power consumption, this amplifier offers low wideband voltage noise performance of 2.1nV/√Hz and 1.4pA/√Hz current noise, along with excellent spurious-free dynamic range (SFDR) of -105dBc at 100KHz. To maintain a low noise environment at lower frequencies, the amplifiers have low 1/f noise of 7nV/√Hz and 13pA/√Hz at 10Hz. ADA4841-2 output can swing to less than 50mV of either rail. The input common-mode voltage range extends down to the negative supply. The ADA4841-2 can drive up to 10pF of capacitive load with minimal peaking. Application includes low power, low noise signal processing, battery-powered instrumentation, 16bit PulSAR® ADC drivers.

• 80MHz typical -3dB bandwidth (VO = 0.02V p-p, TA = 25°C, VS = ±5V)
• 13V/µs typical slew rate (G = +1, VO = 9V step, RL = 1Kohm)
• 40µV typical input offset voltage (TA = 25°C, VS = ±5V, RL = 1Kohm, gain = +1)
• 1µV/°C typical input offset voltage drift (TA = 25°C, VS = ±5V, RL = 1Kohm, gain = +1)
• Operating voltage range from 2.7V to 12V (TA = 25°C, VS = ±5V, RL = 1Kohm, gain = +1)
• 110dB typical positive power supply rejection ratio (+VS = +5V to +6V, -VS = -5V)
• Capacitive load drive is 15pF typical
• 13V/µs typical slew rate (G = +1, VO = 4V step, RL = 1Kohm)
• Input bias current is 60nA typical
• 8 lead MSOP package, operating temperature range from -40°C to +125°C

注释

ADI products are only authorized (and sold) for use by the customer and are not to be resold or otherwise passed on to any third party