MAX22515ATG+

MAX22515ATG+ is a low-power industrial transceiver that can operate as either an IO-Link device or an IO-Link host transceiver in industrial applications. This device features a selectable control interface (pin mode or I²C), two integrated linear regulators, and integrated surge protection for robust communication. The transceiver includes one C/Q input-output channel and one digital input (DI) channel. This device features a flexible control interface. Pin-control logic inputs allow for operation with switching sensors that do not use a microcontroller. For sensors that use a microcontroller, an I²C interface is available providing extensive configuration and diagnostics. Additionally, an integrated oscillator simplifies the clock generation for IO-link devices. It is used in applications such as IO-link sensor and actuator devices, industrial sensors, and IO-link hosts.

• Operates from 8V to 36V, auxiliary digital input (DI), I²C or pin mode control
• Integrated linear regulators: 3.3V and 5V, able to communicate at COM1, COM2, and COM3 data rates
• Hot-plug protection on supply input (V24), glitch filters for improved burst resilience
• ±1.2kV/500 ohm surge protection on V24, C/Q, DI, and GND
• Selectable driver overcurrent configuration, fast demagnetization of inductive loads
• V5 power supply rejection ratio is -65dB typical at (f = 100KHz, ILOAD = 20mA)
• V5 load capacitance is 1μF typical at (external capacitance required on V5)
• C/Q driver low-to-high propagation delay is 0.5μs typ at (push-pull or PNP mode, V24 = 8V to 36V)
• C/Q receiver low-to-high propagation delay is 1.35μs typ at (RXFILTER = 1, V24 = 8V to 36V)
• Operating temperature range from -40°C to +125°C, 24-pin TQFN-EP package

警告

该产品的市场需求较大, 导致交货时间延长。交货日期可能会有延迟。该产品不在折扣范围内。

注释

ADI products are only authorized (and sold) for use by the customer and are not to be resold or otherwise passed on to any third party