您已在下面突出显示的字段中输入包含无效字符的值。 请仅使用有效字符修改您的选择。
产品可能与您的搜索条件并不完全匹配
您买过此产品。
在订单历史记录中查看
CBRPF-CLR-C
开发板外壳, Raspberry Pi & Pi Face, 聚苯乙烯, 透明
产品信息
技术文档 (2)
CAD 下载
--请选择...
✔
--请选择...
×
条款
CAD Models - Notice
CAD Models and drawings are provided to you on a revocable limited licence for your internal use only but remain the property of the manufacturer who retain all intellectual property rights and ownership. They are provided to assist you in decision making and as design guide but are not guaranteed to be error free, accurate or up to date and is not intended to be taken as advice.
Use of these CAD models and other options provided are downloaded and used entirely at your own risk and by continuing you confirm acceptance of the above.
产品概述
The CBRPF-CLR-C is a crystal clear high impact Polystyrene Enclosure with camera cutout for housing the Pi Face™ Digital via clip-in grooves. Pi Camera slot can be opened with a flat headed screwdriver.
- No Screws Required for Installation
- All Cut-outs are Pre-cut into Case, No MODS Required
- Wall Mountable
- High Gloss Finish
- HB Rated, 3mm Thickness
- Acrylic Capped ABS Carbon Fibre Finish
- Transparent Acrylic Light Pipes
应用
成像, 视频和目视, 多媒体, 消费电子产品
内容
Enclosure, 4-piece rubber feet, LED light pipes (excluding clear) and 4-piece actuators.
附注
兼容 Raspberry Pi A/B型
不再進貨
由于市场条件的影响，交货时间仅供一般指导，可能会在短时间内发生变化
| 数量 | 价钱 (不含税) (含税) | 您所支付金额（含增值税） (不含税) |
|---|---|---|
| 1+ | CNY168.90 CNY190.857 | ( ) |
| 5+ | CNY130.84 CNY147.8492 | ( ) |
| 10+ | CNY126.44 CNY142.8772 | ( ) |
定价不可用。 请联系客户服务。
筛选器工具