您已在下面突出显示的字段中输入包含无效字符的值。 请仅使用有效字符修改您的选择。
产品可能与您的搜索条件并不完全匹配
您买过此产品。
在订单历史记录中查看
DS1982-F3+
iButton存储器, 附加产品, 1Kbit, EPROM
产品概述
The DS1982-F3+ is a 1Kb add only iButton in F3 MicroCan package. It is a rugged read/write data carrier that identifies and stores relevant information about product or person to which it is attached. This information can be accessed with minimal hardware such as single port pin of a microcontroller. The DS1982 consists of a factory lasered 64bit registration number that includes an unique 48bit serial number, an 8bit CRC and an 8bit family code (09h) plus 1Kb user programmable EPROM. The power to program and read DS1982 is derived entirely from 1-wire communication line. Data is transferred serially via 1-wire protocol which requires only single data lead and ground return. Alternatively, the part may be programmed multiple times with new data being appended but not overwriting existing data with each subsequent programming of device. A provision is also included for indicating that certain page or pages of data are no longer valid and have been replaced with new or updated data.
- 1024bit EPROM communicates with economy of one signal plus ground
- EPROM partitioned into four 256bit pages for randomly accessing packetized data
- Each memory page can be permanently write protected to prevent tampering
- Additional data can be programmed into EPROM without disturbing existing data
- Reduces control, address, data, power and programming signals to a single data pin
- 8bit family code specifies DS1982 communications requirements to reader
- Reads over wide voltage range of 2.8V to 6V (-40 to 85°C), programs at 11.5V to 12V (-40°C to 50°C)
- Multidrop controller for MicroLAN, digital identification and information by momentary contact
- Durable stainless steel case engraved with registration number withstands harsh environments
- Easily affixed with self stick adhesive backing, latched by its flange or locked with ring
应用
嵌入式设计与开发
警告
Market demand for this product has caused an extension in leadtimes. Delivery dates may fluctuate. Product exempt from discounts.
产品信息
技术文档 (2)
CAD 下载
--请选择...
✔
--请选择...
×
条款
CAD Models - Notice
CAD Models and drawings are provided to you on a revocable limited licence for your internal use only but remain the property of the manufacturer who retain all intellectual property rights and ownership. They are provided to assist you in decision making and as design guide but are not guaranteed to be error free, accurate or up to date and is not intended to be taken as advice.
Use of these CAD models and other options provided are downloaded and used entirely at your own risk and by continuing you confirm acceptance of the above.
可延期交货
由于市场条件的影响，交货时间仅供一般指导，可能会在短时间内发生变化
| 数量 | 价钱 (不含税) (含税) | 您所支付金额（含增值税） (不含税) |
|---|---|---|
| 1+ | CNY27.88 CNY31.50 | ( ) |
| 10+ | CNY25.35 CNY28.65 | ( ) |
| 20+ | CNY24.80 CNY28.02 | ( ) |
| 50+ | CNY24.67 CNY27.88 | ( ) |
| 100+ | CNY22.07 CNY24.94 | ( ) |
| 200+ | CNY21.93 CNY24.78 | ( ) |
| 500+ | CNY21.18 CNY23.93 | ( ) |
| 1000+ | CNY20.09 CNY22.70 | ( ) |
定价不可用。 请联系客户服务。
筛选器工具