您已在下面突出显示的字段中输入包含无效字符的值。 请仅使用有效字符修改您的选择。

产品可能与您的搜索条件并不完全匹配

您买过此产品。 在订单历史记录中查看

 
 

MAX9077EKA+T

模拟比较器, 超小型, 低功耗, 2个比较器, 580 ns, 2.1V 至 5.5V, SOT-23, 8 引脚

MAXIM INTEGRATED PRODUCTS MAX9077EKA+T
×

图片仅用于图解说明,详见产品说明。

制造商产品编号:
MAX9077EKA+T
库存编号
2515163
查看所有技术文档

产品概述

The MAX9077EKA+T is a low cost, ultra small, dual comparator in 8 pin SOT-23 package. It is optimized for 3V and 5V single supply applications. This comparator has 580ns propagation delay and consumes only 3µA per comparator. The combination of low power, single supply operation down to 2.1V and ultra small footprint makes this device ideal for battery operated applications. Unlike many comparators, there is no differential clamp between inputs allowing the differential input voltage range to extend rail to rail. Design of output stage limits supply current surges while switching minimizing power consumption under dynamic conditions. Large internal push-pull output drivers allow rail to rail output swing with loads up to 2mA making this device ideal for interface with TTL/CMOS logic. The MAX9077 is used in battery powered systems, threshold detectors/discriminators, keyless entry systems, IR receivers and digital line receivers.
  • Supply voltage range from 2.1V to 5.5V
  • Operating temperature range from -40°C to 85°C
  • Ground sensing inputs and rail to rail outputs
  • No output phase inversion for overdriven inputs
  • Power supply rejection ratio of 77dB at 2.1V <= VCC <= 5.5V
  • Input offset voltage of ±1mV
  • Input offset current of 1nA and input bias current of -5nA
  • Common mode rejection ratio (CMRR) of 82dB
  • All inputs and outputs tolerate a continuous short circuit fault condition to either rail

应用

信号处理, 便携式器材

产品信息

想要查看类似产品?只需在下方选择所需属性并点击按钮 ×


:
低功耗

:
2个比较器

:
580ns

:
2.1V 至 5.5V

:
SOT-23

:
8引脚

:
轨对轨

:
-40°C

:
85°C

:
-

:
-

:
MSL 1 -无限制
查找类似产品 选择并修改以上属性即可查找类似产品。

技术文档 (1)

CAD 下载

×

条款

CAD Models - Notice
CAD Models and drawings are provided to you on a revocable limited licence for your internal use only but remain the property of the manufacturer who retain all intellectual property rights and ownership. They are provided to assist you in decision making and as design guide but are not guaranteed to be error free, accurate or up to date and is not intended to be taken as advice.
Use of these CAD models and other options provided are downloaded and used entirely at your own risk and by continuing you confirm acceptance of the above.

接受 取消
包装类型 切割卷带

80 有货 需要更多?

80 UK 有库存,可在 4-5 个工作日内交货

CNY18.20 ( CNY20.57  含增值税)

定价不可用。 请联系客户服务

包装规格:
单件(切割供应)
多件: 1 最低: 1
数量 单价(含增值税) 您所支付金额(含增值税)
 
 
1+ CNY18.20 (CNY20.57)
优惠价格
合约价格
仅限网络价格
仅限网络合约价格
  ( )
10+ CNY16.24 (CNY18.35)
优惠价格
合约价格
仅限网络价格
仅限网络合约价格
  ( )
25+ CNY15.30 (CNY17.29)
优惠价格
合约价格
仅限网络价格
仅限网络合约价格
  ( )
100+ CNY14.52 (CNY16.41)
优惠价格
合约价格
仅限网络价格
仅限网络合约价格
  ( )
250+ CNY14.44 (CNY16.32)
优惠价格
合约价格
仅限网络价格
仅限网络合约价格
  ( )
500+ CNY14.19 (CNY16.03)
优惠价格
合约价格
仅限网络价格
仅限网络合约价格
  ( )
1000+ CNY13.84 (CNY15.64)
优惠价格
合约价格
仅限网络价格
仅限网络合约价格
  ( )
2500+ CNY13.32 (CNY15.05)
优惠价格
合约价格
仅限网络价格
仅限网络合约价格
  ( )
5000+ CNY13.16 (CNY14.87)
优惠价格
合约价格
仅限网络价格
仅限网络合约价格
  ( )
 
 

定价不可用。 请联系客户服务

No longer stocked:: No Longer Manufactured::
添加到购物篮 添加到购物篮 预订
添加
受限制物品
添加部件编号/注释行
总价:
总价: ( )
总价: --