您已在下面突出显示的字段中输入包含无效字符的值。 请仅使用有效字符修改您的选择。
产品可能与您的搜索条件并不完全匹配
您买过此产品。
在订单历史记录中查看
ADM00276
演示板, USB至UART, 隔离
产品概述
The ADM00276 from Microchip is a MCP2200 isolated USB to UART demo board. The board features a MCP2200 USB to UART bridge with galvanic isolation and status LEDs. The UART connector has the standard PICkit serial pin-out. The MCP2200 USB to UART with isolation demo board is a USB to UART development and evaluation board for the MCP2200 device. This board is powered from the host's USB port. Two of the MCP2200 GPIO pins (GP6 and GP7) are connected to LEDs used to indicate the USB to UART traffic when the associated pins are configured as TxLED and RxLED pins respectively. The isolated side is powered externally with 3V to 5.5V. The board offers 3.75KV AC of electrical isolation for power and UART signals. Microchip Technology Inc. provides a software package to be used with this board that can be downloaded from Microchip's web site. This PC software is used to evaluate/demonstrate the MCP2200 as a Virtual Com Port (VCP) device. This software also allows custom device configurations.
- Dedicated Tx LED (green) and Rx LED (red) to indicate the USB to UART traffic
- Isolated power LED (green) that indicates the presence of power on the isolated side
- Mini USB connector
- 6 pin PICkit serial header with the UART (Tx and Rx) signals and power signals (VDD and GND)
- Isolated transceiver powered externally from isolated side with 3V to 5.5V
应用
通信与网络
内容
MCP2200 USB to UART with isolation demo board, Mini USB cable, ABS protective case, Important information sheet.
附注
仅限90天保修, 保修期到期后, 必须经过Microchip处理
产品信息
技术文档 (1)
畅销品
32 有货 需要更多？
×
您现在可以预订货品了 订购所需的数量并按正常方式结算。目前无法交付的数量将列入延期交货订单中，并在到货后立即发货。 只有在发货后才会收取您的费用。
将于 21-3-16 再提供 35 件
交付周期内有额外库存， 交付周期大约为 21-4-5
32 可于 4 至 5 个工作日内送达
筛选器工具