您已在下面突出显示的字段中输入包含无效字符的值。 请仅使用有效字符修改您的选择。
产品可能与您的搜索条件并不完全匹配
您买过此产品。
在订单历史记录中查看
MCP4011-202E/SN
易失性数字电位器, AEC-Q100, 2.1 kohm, 单, 2线, 串行, 线性, ± 20%, 1.8 V
- 制造商：
- MICROCHIP MICROCHIP
- 制造商产品编号:
- MCP4011-202E/SN
- 库存编号
- 1834918
- 技术数据表:
- MCP4011-202E/SN Datasheet
产品范围选择器 (Single 64-Tap Volatile Digital Pots)
查看全系列相关产品产品概述
The MCP4011-202E/SN is a 6-bit Digital Potentiometer can be configured as either a potentiometer or rheostat. The wiper setting is controlled through a simple up/down (U/D) serial interface. It is intended to be used in applications where a programmable resistance with moderate bandwidth is desired. The digital potentiometer is available in four nominal resistances (RAB), where the nominal resistance is defined as the resistance between terminal A and terminal B. There are 63 resistors in a string between terminal A and terminal B. The wiper can be set to tap onto any of these 63 resistors thus providing 64 possible settings (including terminal A and terminal B). The VDD pin is the device's positive power supply input. The input power supply is relative to VSS and can range from 1.8 to 5.5V. A decoupling capacitor on VDD (to VSS) is recommended to achieve maximum performance.
- Simple up/down (U/D) protocol
- power-ON recall of default wiper setting
- 10ppm Typical ratiometric (potentiometer)
- 75R Typical low wiper resistance
- Up to 12.5V high-voltage tolerant digital inputs
- 1µA Maximum static current low-power operation
应用
信号处理
产品信息
技术文档 (3)
筛选器工具