您已在下面突出显示的字段中输入包含无效字符的值。 请仅使用有效字符修改您的选择。
产品可能与您的搜索条件并不完全匹配
您买过此产品。
在订单历史记录中查看
MCP4018T-503E/LT
易失性数字电位器, AEC-Q100, 50 kohm, 单, I2C, 线性, ± 20%, 1.8 V
- 制造商：
- MICROCHIP MICROCHIP
- 制造商产品编号:
- MCP4018T-503E/LT
- 库存编号
- 1825019
- 技术数据表:
- MCP4018T-503E/LT Datasheet
产品范围选择器 (Single 128-Tap Volatile Digital Pots)
查看全系列相关产品产品概述
The MCP4018T-503E/LT is a 7-bit Single I²C™ Digital Potentiometer with volatile memory. It features zero scale to full scale wiper operation, 7-bit resistor network resolution and simple I²C protocol with read & write commands. It is intended to be used in applications where a programmable resistance with moderate bandwidth is desired. The potentiometer's terminal B is the fixed connection to the zero scale (0x00 tap) wiper value of the digital potentiometer. The potentiometer's terminal A is the fixed connection to the full scale (0x7F tap) wiper value of the digital potentiometer. The VDD pin is the device's positive power supply input. The input power supply is relative to VSS and can range from 1.8 to 5.5V. A de-coupling capacitor on VDD (to VSS) is recommended to achieve maximum performance. The SCL pin is the serial clock pin of the I²C interface. The SCL pin is an open-drain output.
- 127 Resistors (128 steps)
- 100R Typical low wiper resistance
- Brown-out reset protection (1.5V typical)
- power-ON default wiper setting (mid-scale)
- Low-power operation
- Wide bandwidth operation
产品信息
技术文档 (2)
1,038 有货 需要更多？
×
您现在可以预订货品了 订购所需的数量并按正常方式结算。目前无法交付的数量将列入延期交货订单中，并在到货后立即发货。 只有在发货后才会收取您的费用。
交付周期内有额外库存， 交付周期大约为 21-6-28
1,038 可于 4 至 5 个工作日内送达
| 数量 | 单价（含增值税） | 您所支付金额（含增值税） |
|---|---|---|
| 1+ | CNY3.50 (CNY3.96) | ( ) |
| 25+ | CNY2.89 (CNY3.27) | ( ) |
| 100+ | CNY2.69 (CNY3.04) | ( ) |
定价不可用。 请联系客户服务。
1 (切割卷带 1825019) x 3.5 = CNY3.50
总价: CNY3.50
(CNY4.0 含增值税)
选择您的包装首选项
筛选器工具