您已在下面突出显示的字段中输入包含无效字符的值。 请仅使用有效字符修改您的选择。
产品可能与您的搜索条件并不完全匹配
您买过此产品。
在订单历史记录中查看
MCP4661-103E/ST
非易失性数字电位器, AEC-Q100, 10 kohm, 双, I2C, 串行, 线性, ± 20%, 2.7 V
- 制造商：
- MICROCHIP MICROCHIP
- 制造商产品编号:
- MCP4661-103E/ST
- 库存编号
- 1690416
- 技术数据表:
- MCP4661-103E/ST Datasheet
产品范围选择器 (Dual 257-Tap Non-volatile Digital Pots)
查看全系列相关产品产品概述
The MCP4661-103E/ST is a Digital Potentiometer with non-volatile memory. It offers a wide range of product offerings using an I²C interface. This family of device supports 7-bit and 8-bit resistor networks, non-volatile memory configurations and potentiometer and rheostat pin-outs. It features zero-scale to full-scale wiper operation and resistor network terminal disconnect via the terminal control (TCON) register. The potentiometer's terminal A is the fixed connection to the full-scale wiper value of the digital potentiometer. The potentiometer's terminal B is the fixed connection to the zero scale wiper value of the digital potentiometer. The SCL pin is the serial interfaces serial clock pin. The VDD pin is the device's positive power supply input. The input power supply is relative to VSS. The pad is conductively connected to the potentiometer's substrate. This pad should be tied to the same potential as the VSS pin (or left unconnected).
- Non-volatile memory
- Automatic recall of saved wiper setting
- WiperLock™ technology
- 10 General purpose memory locations
- High-speed read/write to wiper
- Read/write to EEPROM
- Write protect to be enabled/disabled
- WiperLock to be enabled/disabled
- Brown-out reset protection (1.5V typical)
- Serial interface inactive current (2.5uA typical)
- Up to 12.5V high-voltage tolerant digital inputs
应用
信号处理
产品信息
技术文档 (3)
筛选器工具