您已在下面突出显示的字段中输入包含无效字符的值。 请仅使用有效字符修改您的选择。
产品可能与您的搜索条件并不完全匹配
您买过此产品。
在订单历史记录中查看
STM32-H103
Header Board for STM32F103RBT6 Microcontroller
产品信息
技术文档 (1)
CAD 下载
--请选择...
✔
--请选择...
×
条款
CAD Models - Notice
CAD Models and drawings are provided to you on a revocable limited licence for your internal use only but remain the property of the manufacturer who retain all intellectual property rights and ownership. They are provided to assist you in decision making and as design guide but are not guaranteed to be error free, accurate or up to date and is not intended to be taken as advice.
Use of these CAD models and other options provided are downloaded and used entirely at your own risk and by continuing you confirm acceptance of the above.
产品概述
The STM32F103 Performance Line family has an embedded ARM core and is therefore compatible with all ARM tools and software. It combines the high performance ARM Cortex-M3 CPU with an extensive range of peripheral functions and enhanced I/O capabilities. STM32-H103 is a low-cost development board for the new ST Cortex-M3 based microcontrollers STM32F103RBT6. This board is the perfect solution for USB peripherals development. All microcontroller ports are available on extension connectors.
- Standard JTAG connector with ARM 2x10 pin layout for programming/debugging with ARM-JTAG
- USB connector
- User button
- RESET button
- Single power supply, takes power from USB port or extension connector pin
- 8 MHz crystal oscillator
- Extension headers for all uC ports
- 32768 Hz crystal and RTC backup battery connector
应用
通信与网络, 嵌入式设计与开发, 信号处理
不再進貨
由于市场条件的影响，交货时间仅供一般指导，可能会在短时间内发生变化
筛选器工具