您已在下面突出显示的字段中输入包含无效字符的值。 请仅使用有效字符修改您的选择。

产品可能与您的搜索条件并不完全匹配

您买过此产品。 在订单历史记录中查看

 
 

PICOSCOPE 4444 STANDARD KIT

PC USB示波器, PicoScope 4000, 4 通道, 20 MHz, 50 MSPS, 256 Mpts, 17.5 ns

PICO TECHNOLOGY PICOSCOPE 4444 STANDARD KIT
视频
×
×

图片仅用于图解说明,详见产品说明。

制造商产品编号:
PICOSCOPE 4444 STANDARD KIT
库存编号
2748593
产品范围
PicoScope 4000
也称为:
PQ073
查看所有技术文档

产品范围选择器 (PicoScope 4000)

查看全系列相关产品

产品信息

想要查看类似产品?只需在下方选择所需属性并点击按钮 ×


:
PicoScope 4000

:
4 通道

:
20MHz

:
50MSPS

:
256 Mpts

:
17.5ns

:
PicoScope 4444标准套件, 差分示波器, 带3个PicoConnect 441 1:1差分电压探头和一个TA271 D9-BNC适配器

:
-

:
-

查找类似产品 选择并修改以上属性即可查找类似产品。

技术文档 (3)

CAD 下载

×

条款

CAD Models - Notice
CAD Models and drawings are provided to you on a revocable limited licence for your internal use only but remain the property of the manufacturer who retain all intellectual property rights and ownership. They are provided to assist you in decision making and as design guide but are not guaranteed to be error free, accurate or up to date and is not intended to be taken as advice.
Use of these CAD models and other options provided are downloaded and used entirely at your own risk and by continuing you confirm acceptance of the above.

接受 取消

产品概述

Most oscilloscopes employ grounded BNC inputs where the shell is tied directly to ground, which means that expensive Active Differential Probes are required for floating or differential measurements that are not referenced to ground. The new PicoScope 4444 High Resolution, Differential Input Oscilloscope, allows the use of inexpensive Passive Differential Probes where floating or differential signals are encountered. Two kits provide a choice of differential probes for either low level voltages or up to 1000V CAT III, for easy connection to floating voltages or differential signals, plus a choice of current probes for power measurements. 12 & 14 bit digitizers with vertical zoom allow visualization of very low level signals. Serial bus decoders, makes for easy decode of differential busses such as CAN FD and RS422/485. With its small size and all the features that PicoScope software provides, it make a great general purpose scope for the bench or the field.
  • 4 fully differential high-impedance inputs
  • 20 MHz bandwidth
  • Flexible 12 and 14-bit resolution
  • Maximum input range at full scale is ±50V (±1000V using the PicoConnect 442 1000V CAT III probe)
  • Maximum common-mode range is also ±50V (also ±1000V with the PicoConnect 442 probe)
  • 256 MS deep memory
  • Rejects common mode noise
  • Interface for intelligent probes and clamps
  • Low-voltage probe for sub-millivolts to 50 V
  • 1000V CAT III probe for high voltage applications
  • Serial Bus Decodes (E.g. I2C, SPI, RS232/422/485, CAN/FD, ModBus)

应用

测试与测量

内容

High-resolution differential oscilloscope, 3x PicoConnect 441 1:1 passive differential voltage probes and TA271 single-ended D9-BNC adaptor

附注

校准服务可用于此产品. 可选择标准认证服务, 或国际认可的UKAS认证校准. 请访问我们的校准页面去了解更多详情.

也称为

PQ073
畅销品

6 有货 需要更多?

6 UK 有库存,可在 4-5 个工作日内发货

CNY10,629.95 ( CNY12,011.84  含增值税)

定价不可用。 请联系客户服务

包装规格:
每个
多件: 1 最低: 1
数量 单价(含增值税) 您所支付金额(含增值税)
 
 
1+ CNY10,629.95 (CNY12,011.84)
优惠价格
合约价格
仅限网络价格
仅限网络合约价格
  ( )
 
 

定价不可用。 请联系客户服务

No longer stocked:: No Longer Manufactured::
添加到购物篮 添加到购物篮 预订
添加
受限制物品
添加部件编号/注释行
总价:
总价: ( )
总价: --