TLP3122A(E(T
MOSFET继电器, SPST-NO (1 Form A), AC / DC, 60 V, 1.4 A, SOP-4, 表面安装
1,750 您现在可以预订货品了
| 数量 | 价钱 (含税) |
|---|---|
| 1+ | CNY44.470 (CNY50.2511) |
| 10+ | CNY21.420 (CNY24.2046) |
| 25+ | CNY20.680 (CNY23.3684) |
| 50+ | CNY20.170 (CNY22.7921) |
| 100+ | CNY19.770 (CNY22.3401) |
产品概述
TLP3122A(E(T is a photo relay. It consists of an infrared LED optically coupled to a photo-MOSFET. This photo relay has higher output current rating than phototransistor-type photocoupler; hence, it is suitable for use as On/Off control for high current. It is approved by UL-recognized: UL 1577, File No.E67349, cUL-recognized: CSA Component Acceptance Service No.5A File No.E67349, UL-recognized: UL 508, File No.E499232, VDE-approved: EN 60747-5-5. It is used in applications such as measuring instruments, security systems, ATE (automatic test equipment), factory automation (FA), battery management system (BMS) (non-automotive), programmable logic controllers (PLCs), mechanical relay replacements.
- Halogen-free, normally opened (1-Form-A)
- OFF-state output terminal voltage is 60V minimum
- Trigger LED current is 3mA maximum
- ON-state current is 1.4mA maximum
- ON-state resistance is 0.255ohm maximum
- Isolation voltage is 3750Vrms minimum
- Operating temperature range from -40°C to 110°C
- 4-pin SO6 package
技术规格
SPST-NO (1 Form A)
60V
SOP-4
鸥翼
3.75kV
1µA
AC / DC
1.4A
表面安装
0.25ohm
0.8pF
-
技术文档 (1)
法律与环境
进行最后一道重要生产流程所在的地区原产地：Thailand
进行最后一道重要生产流程所在的地区
RoHS
RoHS
产品合规证书