您已在下面突出显示的字段中输入包含无效字符的值。 请仅使用有效字符修改您的选择。
产品可能与您的搜索条件并不完全匹配
您买过此产品。
在订单历史记录中查看
PHAT-GPM
套件, GPS 模块, RASPBERRY PI
产品信息
技术文档 (1)
CAD 下载
--请选择...
✔
--请选择...
×
条款
CAD Models - Notice
CAD Models and drawings are provided to you on a revocable limited licence for your internal use only but remain the property of the manufacturer who retain all intellectual property rights and ownership. They are provided to assist you in decision making and as design guide but are not guaranteed to be error free, accurate or up to date and is not intended to be taken as advice.
Use of these CAD models and other options provided are downloaded and used entirely at your own risk and by continuing you confirm acceptance of the above.
产品概述
The pHAT-GPM is part of the Designer Systems Global Positioning System range of modules for the Arduino, Raspberry-Pi or other I2C bus platforms. It features a 99 Channel GPS/GLONASS engine with fast Time To First Fix (TTFF), 2.5m accuracy and 3 axis accelerometer all of which is fully accessible over the high speed I2C interface. Full on-board processing of NMEA sentences leaves the host platform to perform other tasks.
- Raspberry Pi Zero standard form factor for simple integration into any Raspberry Pi project
- I2C interface for simple interfacing
- Gives your robot the ability to know where it is, how fast its moving and in what direction
- Fast 99-channel GPS and GLONASS position acquisition with battery backup
- Simple register based data retrieval of latitude, longitude, heading, altitude, speed, time, date
- Integral low power antenna
- 3D Accelerometer with internal raw g and inclination registers
畅销品
可延期交货
由于市场条件的影响，交货时间仅供一般指导，可能会在短时间内发生变化
筛选器工具