LT1207CS#PBF

LT ® 1207 is a dual version of the LT1206 high speed current feedback amplifier. The LT1207 includes a pin for an optional compensation network which stabilizes the amplifier for heavy capacitive loads. Both amplifiers have thermal and current limit circuits which protect against fault conditions. These capabilities make the LT1207 well suited for driving difficult loads such as cables in video or digital communication systems. Operation is fully specified from ±5V to ±15V supplies. Typical applications include ADSL/HDSL Drivers, video amplifiers, cable drivers, RGB amplifiers, test equipment amplifiers and buffers.

• 3.6nV/√Hz input noise voltage density at f = 10KHz, RF = 1K, RG = 10 ohm, RS = 0 ohm
• 900V/µs typ slew rate
• 60MHz typ small-signal bandwidth at VS = ±15V, RF = RG = 620 ohm, RL = 100 ohm
• ±15mV offset voltage at TA = 25°C, 71dB typ large-signal voltage gain at VS = ±15V, VOUT = ±10V
• Maximum output voltage swing: ±2V min at VS = ±5V, RL = 25ohm, TA = 25°C
• 35mA typ supply current per amplifier at VS = ±15V, VSHDN = 0V, TA = 25°C
• 62db typ CMRR at VS = ±15V, VCM = ±12V and 77dB PSRR at VS = ±5V to ±15V
• 0.02% typ differential gain and 0.17° typ differential phase at VS = ±15V, RF=RG = 560 ohm
• 16 lead NSOIC package
• Operating temperature range from 0 to 70°C

Notes

ADI products are only authorized (and sold) for use by the customer and are not to be resold or otherwise passed on to any third party