CYPAS213A132LQXQTXUMA1

CYPAS213A132LQXQTXUMA1 is an EZ-PD™ PAG2S-PS integrated USB PD and synchronous-rectification controller. It Is an integrated secondary-side controller with USB power delivery controller and synchronous rectifier. EZ-PD™ PAG2S-PS is targeted towards USB-C power adapters, it fits well into high-efficiency AC-DC flyback designs with USB power delivery, Qualcomm quick charge, and other standard charging protocols. EZ-PD™ PAG2S-PS also supports USB power delivery extended power range (EPR) mode. It supports synchronous rectification in quasi-resonant (QR), critical conduction mode (CrCM), discontinuous conduction mode (DCM), and continuous conduction code (CCM) and supports switching frequency up to 300KHz. It is used in applications such as USB-C chargers and adapters, USB-C chargers and adapters with EPR, power adapters supporting both USB PD and legacy charging.

• SR driver works with both standard MOSFET and logic level MOSFET
• USB PD 3.1 compliant with extended power range (EPR) support of up to 28V VBUS
• Integrates a 32-bit Cortex® M0+ with 64Kb flash, 8Kb SRAM, and 64Kb ROM
• Latch up current limit is 100mA maximum
• Integral non-linearity (ADC DC) is 2.5LSB maximum
• Pull-down resistor value (GPIO) is 5.6Kohm typical
• CPU input frequency is 48MHz maximum
• Power supply slew rate during power up is 67V/ms maximum
• Switch turn-on time (Ton) is 600µs maximum
• Operating temperature range from -40°C to +85°C, 32-pin QFN package