STM32F072RBT6

The STM32F072RBT6 is a Microcontroller incorporates the high-performance ARM Cortex®-M0 32-bit RISC core operating at a 48MHz frequency, high-speed embedded memories (up to 128kb of flash memory and 16kb of SRAM) and an extensive range of enhanced peripherals and I/Os. All devices offer standard communication interfaces (two I²Cs, two SPIs/one I2S, one HDMI CEC and four USARTs), one USB Full speed device (crystal-less), one CAN, one 12-bit ADC, one 12-bit DAC with two channels, seven general-purpose 16-bit timers, a 32-bit timer and an advanced-control PWM timer. A comprehensive set of power-saving modes allows the design of low-power applications.

• ARM® 32-bit Cortex®-M0 CPU, Frequency up to 48MHz Core
• 64 to 128kb Flash Memory
• 16kb SRAM with HW Parity
• CRC Calculation Unit
• VDDA = VDD to 3.6V Analogue Supply
• Power-on/Power Down Reset (POR/PDR)
• Sleep, Stop and Standby Low Power Modes
• 4 to 32MHz Crystal Oscillator
• 32kHz Oscillator for RTC with Calibration
• Internal 8MHz RC with x6 PLL Option
• Internal 48MHz Oscillator with Automatic Trimming Based on External Synchronization
• All Mappable on External Interrupt Vectors
• Up to 68 I/Os with 5V Tolerant Capability and 19 with Independent Supply VDDIO2
• 7-channel DMA Controller
• One 12-bit, 1.0μs ADC (up to 16 Channels)
• 0 to 3.6V Conversion Range
• Calendar RTC with Alarm and Periodic Wakeup from Stop/Standby
• One 16-bit Advanced-control Timer for 6-channel PWM Output
• 32-bit and Seven 16-bit Timers, with up to 4 IC/OC OCN usable for IR control decoding or DAC control
• Independent and System Watchdog Timers
• SysTick Timer
• HDMI CEC Wakeup on Header Reception
• Serial Wire Debug (SWD)
• 96-bit Unique ID

Applications

Embedded Design & Development, Signal Processing, Computers & Computer Peripherals