TLV62130RGTT

The TLV62130RGTT is a 3A Step-down Converter with DCS-Control™ optimized for applications with high power density. A high switching frequency of typically 2.5MHz allows the use of small inductors and provides fast transient response as well as high output voltage accuracy by use of the DCS-Control™ topology. With its wide operating input voltage range of 3 to 17V, the converter is ideally suited for systems powered from either a Li-ion or other batteries as well as from 12V intermediate power rails. It supports up to 3A continuous output current at output voltages from 0.9 to 5V (with 100% duty cycle mode). The output voltage start-up ramp is controlled by the soft-start pin, which allows operation as either a standalone power supply or in tracking configurations. Power sequencing is also possible by configuring the Enable and open-drain power good pins. In power save mode, the device draws quiescent current of about 19µA from VIN.

• DCS-Control™ topology
• 0.9 to 5V Adjustable output voltage
• Pin-selectable output voltage (nominal, +5%)
• Programmable soft start and tracking
• Seamless power save mode transition
• Quiescent current of 19µA (typical)
• Selectable operating frequency
• Power good output
• 100% Duty cycle mode
• Short-circuit protection
• Over-temperature protection
• Green product and no Sb/Br

Applications

Power Management, Portable Devices, Communications & Networking, Consumer Electronics, Computers & Computer Peripherals, Imaging, Video & Vision

Warnings

This device has limited built-in ESD protection, leads should be shorted together or the device placed in conductive foam during storage or handling to prevent electrostatic damage to the MOS gates.