您已在下面突出显示的字段中输入包含无效字符的值。 请仅使用有效字符修改您的选择。
产品可能与您的搜索条件并不完全匹配
您买过此产品。
在订单历史记录中查看
NC7SZ11P6X
AND Gate, Ultra High Speed, 3 Input, 32 mA, 1.65V to 5.5V, SC-70-6
产品范围选择器 (7S11)
查看全系列相关产品产品概述
The NC7SZ11P6X is a single 3-input AND Gate from ultra-high speed series of TinyLogic®. The device is fabricated with advanced CMOS technology to achieve ultra-high speed with high output drive while maintaining low static power dissipation over a very broad VCC operating range. The device is specified to operate over the 1.65 to 5.5V VCC range. The inputs and output are high impedance when VCC is 0V. Inputs tolerate voltages up to 7V independent of VCC operating voltage.
- 2.7ns Propagation delay (tPD)
- ±24mA High output drive at 3V
- Power down high-impedance Inputs/Output
- Over-voltage tolerant inputs facilitate 5V to 3V translation
- Patented noise/EMI reduction circuitry implemented
应用
工业
警告
Market demand for this product has caused an extension in leadtimes. Delivery dates may fluctuate. Product exempt from discounts.
产品信息
技术文档 (4)
CAD 下载
--请选择...
✔
--请选择...
×
条款
CAD Models - Notice
CAD Models and drawings are provided to you on a revocable limited licence for your internal use only but remain the property of the manufacturer who retain all intellectual property rights and ownership. They are provided to assist you in decision making and as design guide but are not guaranteed to be error free, accurate or up to date and is not intended to be taken as advice.
Use of these CAD models and other options provided are downloaded and used entirely at your own risk and by continuing you confirm acceptance of the above.
可延期交货
×
将于 22-12-6 再提供 7,630 件
将于 23-1-1 再提供 12,000 件
将于 22-7-26 再提供 5,113 件
将于 22-8-1 再提供 3,220 件
将于 22-8-24 再提供 3,220 件
51
您现在可以预订货品了 订购所需的数量并按正常方式结算。目前无法交付的数量将列入延期交货订单中，并在到货后立即发货。
由于市场条件的影响，交货时间仅供一般指导，可能会在短时间内发生变化
| 数量 | 价钱 (不含税) (含税) | 您所支付金额（含增值税） (不含税) |
|---|---|---|
| 5+ | CNY3.01 CNY3.40 | ( ) |
| 25+ | CNY2.72 CNY3.07 | ( ) |
| 100+ | CNY1.88 CNY2.12 | ( ) |
| 250+ | CNY1.58 CNY1.79 | ( ) |
| 500+ | CNY1.28 CNY1.45 | ( ) |
| 1000+ | CNY0.986 CNY1.11 | ( ) |
定价不可用。 请联系客户服务。
5 (切割卷带 1607788) x 3.01 = CNY15.05
5 (切割卷带 1607788) x 3.4013 = CNY17.0065
总价: CNY15.05
( 不含税 )
总价: CNY17.01
( 含税 )
选择您的包装首选项
筛选器工具