TLD5099EPVSEPICEVALTOBO1

TLD5099EPVSEPICEVALTOBO1 is an evaluation board in SEPIC topology designed as constant voltage regulator. The evaluation board for medium power application with TLD5099EP configured in voltage-mode SEPIC topology. It can be implemented as a DC-DC power supply with constant voltage output. The default configuration of the board is voltage-mode SEPIC topology without any additional features enabled. In this configuration, it can deliver up to 12W to the load with an efficiency above 85%. Auxiliary circuits which protect the DC-DC and the load during short to ground, forcing the current to zero, are not present. The short to ground current is limited to a few amps by the embedded current control loop.

• Input supply voltage range from 8 to 27V (Down to 6.5V for less than 2s)
• 1A maximum output current at resistive load
• 400KHz switching frequency at VIN = 13.2V, spread spectrum "on"
• Efficiency > 85% (measured with a 12ohm power resistor as load)
• 12V output voltage (output voltage related to ground)
• 16V output overvoltage protection (output voltage related to ground)

警告

该产品的市场需求较大, 导致交货时间延长。交货日期可能会有延迟。该产品不在折扣范围内。