P2036 300 MHZ 10:1 PASSIVE PROBE

P2036 1PK is a 10:1 miniature probe (single pack) for oscilloscope with up to 300MHz bandwidth. The entire probe core is made of a high-quality CeramCore™ ceramic hybrid. Pure coaxial design and laser-trimmed resistors ensure highest signal fidelity along the signal path, offering high bandwidth and fast risetimes for accurate impulse measurements. With a maximum input voltage of 300V CAT II, these probes are equally suitable in service and development environments. The read-out BNC connector is automatically recognized as a 10:1 attenuator by scopes such as the PicoScope 6000E Series that feature a sense ring. The compact design with its 2.5mm housing diameter at the tip provides better visibility on the DUT (device under test) in dense SMT circuits than conventional 5mm housings.

• 1ns probe resistance
• Compatible with PicoScope 6000E Series 300MHz oscilloscopes
• 1Mohm scope input impedance
• 10Mohm resistance at probe tip and 9.5pF capacitance at probe tip
• IEC/EN 61010-031 safety standard
• 1.3m cable length
• 1.3m cable length

内容

P2036 300MHz passive probe, 1 x coding rings (3 x 4 colours), 1 x ground blade 2.5mm, 1 x ground lead 15cm, 1 x ground spring 2.5mm, 1 x IC cap 2.5 0.5mm pitch (green), 1 x IC cap 2.5 0.65mm pitch (blue), 1 x IC cap 2.5 0.8 mm pitch (grey), 1 x IC cap 2.5 1.0mm pitch (brown), 1 x IC cap 2.5 1.27mm pitch (black), 1 x insulating cap 2.5mm, 1 x PCB adaptor kit 2.5mm, 2 x self-adhesive Cu pad 2 x 2cm, 1 x solid tip CuBe, 0.5mm, 1 x spring tip gold-plated 0.5mm, 1 x sprung hook 2.5mm, 1 x trim tool.