需要更多?
数量 | 价钱 (含税) |
---|---|
100+ | CNY10.310 (CNY11.6503) |
250+ | CNY10.150 (CNY11.4695) |
500+ | CNY10.000 (CNY11.300) |
1000+ | CNY9.850 (CNY11.1305) |
2500+ | CNY9.690 (CNY10.9497) |
产品信息
产品概述
The ADC101C021CIMK/NOPB is a 10-bit successive-approximation Analogue-to-digital Converter operates from a +2.7 to 5.5V supply. The low-power monolithic converter is based on successive approximation register architecture with an internal track-and-hold circuit that can handle input frequencies up to 11MHz. The ADC101C021 operates from a single supply which also serves as the reference. The device features an I²C-compatible serial interface that operates in all three speed modes, including high speed mode 3.4MHz. The ADC's Alert feature provides an interrupt that is activated when the analogue input violates a programmable upper or lower limit value. The device features an automatic conversion mode, which frees up the controller and I²C interface. In this mode, the ADC continuously monitors the analogue input for an "out-of-range" condition and provides an interrupt if the measured voltage goes out-of-range.
- Out-of-range alert function
- Automatic power-down mode while not converting
- 1µs Typical conversion time
- 188.9kSPS Maximum throughput rate
- Green product and no Sb/Br
警告
This device has limited built-in ESD protection, leads should be shorted together or the device placed in conductive foam during storage or handling to prevent electrostatic damage to the MOS gates.
技术规格
10bit
单端
单
5.5V
6引脚
105°C
-
No SVHC (27-Jun-2018)
188.9kSPS
2线, I2C, 串行
2.7V
TSOT-23
-40°C
Single 10-Bit SAR ADCs
MSL 1 -无限制
法律与环境
进行最后一道重要生产流程所在的地区原产地:Malaysia
进行最后一道重要生产流程所在的地区
RoHS
RoHS
产品合规证书