打印页面
TLC5928DBQR
LED驱动器, 16输出, 恒定电流, 3V-5.5V输入, 35MHz开关, 17V/35mA输出, SSOP-24
6 有货
需要更多？
6 件可于 5-6 个工作日内送达(英国 库存)
| 数量 | 价钱 (含税) |
|---|---|
| 1+ | CNY11.740 (CNY13.2662) |
| 10+ | CNY7.780 (CNY8.7914) |
| 50+ | CNY7.340 (CNY8.2942) |
| 100+ | CNY6.900 (CNY7.797) |
| 250+ | CNY6.480 (CNY7.3224) |
| 500+ | CNY6.240 (CNY7.0512) |
| 1000+ | CNY6.040 (CNY6.8252) |
| 2500+ | CNY5.200 (CNY5.876) |
包装规格：单件（切割供应）
最低: 1
多件: 1
CNY11.74 (CNY13.27 含税)
品項附註
此订单的信息已添加到您的订单确认邮件、发票和发货通知中。
该代码将添加到订单确认、发票、发货通知、订单确认电子邮件和产品标签中。
产品概述
The TLC5928DBQR is a 16-channel Constant-current Sink LED Driver with LED open detection. Each channel can be turned on/off by writing serial data to an internal register. The constant-current value of all 16 channels is set by a single external resistor. The TLC5928DBQR has two error detection circuits, one for LED open detection (LOD) and one for a pre-thermal warning (PTW). LOD detects a broken or disconnected LED and LEDs shorted to GND while the constant-current output is on. PTW indicates a high temperature condition.
- 16 Channels, constant-current sink output with on/off control
- 35mA Capability (constant-current sink)
- 10ns High-speed constant-current switching transient time
- Low on-time error
- LED power supply voltage up to 17V
- ±1% Channel-to-channel, ±1% device-to-device constant-current accuracy
- CMOS logic level I/O
- 35MHz Data transfer rate
- 20ns BLANK pulse width
- LED open detection (LOD) and pre-thermal warning (PTW) readable error information
- Green product and no Sb/Br
技术规格
拓扑结构
恒流
输入电压最小值
3V
输出电压最大值
17V
典型开关频率
35MHz
IC 外壳 / 封装
SSOP
工作温度最小值
-40°C
产品范围
-
湿气敏感性等级
MSL 2 - 1年
汽车质量标准
-
驱动器封装类型
SSOP
开关频率
35MHz
LED驱动器类型
-
输入电压最大值
5.5V
输出电流最大值
35mA
芯片安装
表面安装
针脚数
24引脚
工作温度最高值
85°C
合规
-
SVHC(高度关注物质)
No SVHC (27-Jun-2018)
设备拓扑
恒流
输出数
16输出
技术文档 (1)
法律与环境
原产地：
进行最后一道重要生产流程所在的地区原产地：Malaysia
进行最后一道重要生产流程所在的地区
进行最后一道重要生产流程所在的地区原产地：Malaysia
进行最后一道重要生产流程所在的地区
税则号：85423990
US ECCN:EAR99
EU ECCN:NLR
RoHS 合规：是
RoHS
RoHS 邻苯二甲酸盐合规:是
RoHS
SVHC:No SVHC (27-Jun-2018)
下载产品合规证书
产品合规证书
重量（千克）：.000275