您已在下面突出显示的字段中输入包含无效字符的值。 请仅使用有效字符修改您的选择。

产品可能与您的搜索条件并不完全匹配

您买过此产品。 在订单历史记录中查看

 
 

ATMEGA1284P-XPLD

评估套件, ATMEGA1284P MCU, 传感器, 机械按钮, LED, UART至USB桥

MICROCHIP ATMEGA1284P-XPLD
MICROCHIP ATMEGA1284P-XPLD
360°
×
×

图片仅用于图解说明,详见产品说明。

制造商产品编号:
ATMEGA1284P-XPLD
库存编号
2215344
查看所有技术文档

产品信息

想要查看类似产品?只需在下方选择所需属性并点击按钮 ×


:
Atmel

:
8位

:
ATmega

:
AVR

:
megaAVR

:
ATmega1284P

:
评估板, 用于MEGA-1284P

:
-

查找类似产品 选择并修改以上属性即可查找类似产品。

技术文档 (3)

CAD 下载

×

条款

CAD Models - Notice
CAD Models and drawings are provided to you on a revocable limited licence for your internal use only but remain the property of the manufacturer who retain all intellectual property rights and ownership. They are provided to assist you in decision making and as design guide but are not guaranteed to be error free, accurate or up to date and is not intended to be taken as advice.
Use of these CAD models and other options provided are downloaded and used entirely at your own risk and by continuing you confirm acceptance of the above.

接受 取消

产品概述

The ATMEGA1284P-XPLD is an evaluation board for megaAVR. It features an ATmega1284P and additional components demonstrating the features of the device. The AVR Explained kits are great platforms for early evaluation of the capabilities offered by the AVR microcontrollers. The MEGA-1284P Explained contain one QTouch button sensor, three mechanical buttons, four LED's, 3 analogue sensors, a UART to USB bridge. The AVR Explained expansion headers provide easy access to analogue and digital I/O pins. The board is powered by the USB cable and equipped with the standard 10pin JTAG header that connects to the full range of AVR debuggers. The MEGA-1284P Explained can be used to evaluate the ATmega164/324/644/1284 microcontrollers and the A, P and PA versions of these devices. These devices share the same peripherals, and differ only in memory size electrical characteristics such as power consumption.
  • ATmega1284P microcontroller
  • Read temperature sensor with the ADC
  • Read light sensor with the ADC
  • Use the Atmel QTouch library to detect touches on the touch button
  • Use PWM as input to an analogue filter and ADC to measure the filter response
  • 3 push buttons to interact with the microcontroller
  • 4 LED's to show status information
  • Board controller that routes data from the ATmega1284P UART to the PC via USB
  • Program the kit via bootloader or an Atmel programmer
  • Expand the board with Explained top modules

附注

90 Day Warranty only. After Expiration of Warranty returns must be processed via Microchip.

警告

Market demand for this product has caused an extension in leadtimes. Delivery dates may fluctuate. Product exempt from discounts.
畅销品

可延期交货

交付周期内将会有更多库存,大约为 23-2-13

由于市场条件的影响,交货时间仅供一般指导,可能会在短时间内发生变化

有货时请通知我

CNY346.91 ( 不含税  ) CNY392.01 ( 含税 )

定价不可用。 请联系客户服务

包装规格:
每个
多件: 1 最低: 1
数量 价钱 (不含税) (含税) 您所支付金额(含增值税) (不含税)
 
 
1+ CNY346.91 CNY392.01
优惠价格
合约价格
仅限网络价格
仅限网络合约价格
  ( )
 
 

定价不可用。 请联系客户服务

No longer stocked:: No Longer Manufactured::
添加到购物篮 添加到购物篮 预订
添加
受限制物品
添加部件编号/注释行
总价: ( 不含税  )
总价: ( 含税 )
总价: --