您已在下面突出显示的字段中输入包含无效字符的值。 请仅使用有效字符修改您的选择。

产品可能与您的搜索条件并不完全匹配

您买过此产品。 在订单历史记录中查看

 
 

ATSAMD21-XPRO

评估套件, SAM D21ARM®Cortex®-M0 + MCU, 机械按钮, 板载调试器

MICROCHIP ATSAMD21-XPRO
MICROCHIP ATSAMD21-XPRO
360°
×
×

图片仅用于图解说明,详见产品说明。

制造商产品编号:
ATSAMD21-XPRO
库存编号
2407175
查看所有技术文档

产品信息

想要查看类似产品?只需在下方选择所需属性并点击按钮 ×


:
Atmel

:
32位

:
SAM D

:
ARM

:
Cortex-M0+

:
ATSAMD21J18A

:
评估板ATSAMD21J18A

:
-

查找类似产品 选择并修改以上属性即可查找类似产品。

技术文档 (4)

CAD 下载

×

条款

CAD Models - Notice
CAD Models and drawings are provided to you on a revocable limited licence for your internal use only but remain the property of the manufacturer who retain all intellectual property rights and ownership. They are provided to assist you in decision making and as design guide but are not guaranteed to be error free, accurate or up to date and is not intended to be taken as advice.
Use of these CAD models and other options provided are downloaded and used entirely at your own risk and by continuing you confirm acceptance of the above.

接受 取消

产品概述

The ATSAMD21-XPRO evaluation kit is ideal for evaluating and prototyping with ATSAMD21J18A ARM Cortex-M0+ based microcontroller. The ATSAMD21J18A is a low power microcontrollers using the 32bit ARM Cortex- M0+ processor and ranging with up to 256KB flash and 32KB of SRAM. This device operate at a maximum frequency of 48MHz and reach 2.14 Coremark/MHz. Supported by the Atmel Studio integrated development platform, the kit provides easy access to the features of the ATSAMD21J18A and explains how to integrate the device in a custom design. The Xplained Pro microcontroller evaluation kit include an on-board embedded debugger and no external tools are necessary to program or debug the ATSAMD21J18A. The Xplained Pro extension kits offers additional peripherals to extend the features of the board and ease the development of custom designs.
  • Programming and debugging on-board ATSAMD21J18A through serial wire debug (SWD)
  • USB interface
  • Virtual COM port interface to target via UART
  • Data gateway interface (DGI) to target via SPI and TWI
  • Four GPIOs connected to target for code instrumentation
  • Digital input and output
  • Two mechanical buttons (user and reset button)
  • One user LED and three possible power sources
  • USB interface, device and reduced host mode
  • 32KHz crystal

附注

90 Day Warranty only. After Expiration of Warranty returns must be processed via Microchip.

警告

Do not power the board without having the jumper or an ammeter mounted. This can cause the ATSAMD21J18A to be powered through its I/O pins and cause undefined operation of the device.
畅销品

可延期交货

送货开始日期 22-8-26

由于市场条件的影响,交货时间仅供一般指导,可能会在短时间内发生变化

有货时请通知我

CNY307.43 ( 不含税  ) CNY347.40 ( 含税 )

定价不可用。 请联系客户服务

包装规格:
每个
多件: 1 最低: 1
数量 价钱 (不含税) (含税) 您所支付金额(含增值税) (不含税)
 
 
1+ CNY307.43 CNY347.40
优惠价格
合约价格
仅限网络价格
仅限网络合约价格
  ( )
 
 

定价不可用。 请联系客户服务

No longer stocked:: No Longer Manufactured::
添加到购物篮 添加到购物篮 预订
添加
受限制物品
添加部件编号/注释行
总价: ( 不含税  )
总价: ( 含税 )
总价: --