您已在下面突出显示的字段中输入包含无效字符的值。 请仅使用有效字符修改您的选择。
产品可能与您的搜索条件并不完全匹配
您买过此产品。
在订单历史记录中查看
MK 9163N.12/110 ATEX AC 50/60HZ 230V
过载继电器, 热敏电阻电机保护, 230 V
产品信息
技术文档 (1)
CAD 下载
--请选择...
✔
--请选择...
×
条款
CAD Models - Notice
CAD Models and drawings are provided to you on a revocable limited licence for your internal use only but remain the property of the manufacturer who retain all intellectual property rights and ownership. They are provided to assist you in decision making and as design guide but are not guaranteed to be error free, accurate or up to date and is not intended to be taken as advice.
Use of these CAD models and other options provided are downloaded and used entirely at your own risk and by continuing you confirm acceptance of the above.
产品概述
The MK 9163N.12/110 ATEX AC 50/60HZ 230V is a DIN rail Thermistor Motor Protection Relay protects against thermal overload of motors caused by high switching frequency, heavy duty starting, phase failure on one phase, bad cooling, high ambient temperature. It functions as - If one of the sensors in the measuring circuit reaches the response temperature (or broken wire is detected), the device indicates failure. This failure is stored in the device with manual reset, even if the temperature goes back to normal. The unit can be reset by pressing the test/reset button, by bridging X1/X2 for a short moment or by disconnecting the auxiliary supply for a short time. Besides the reset function test/reset button provides in normal operation a test facility. The unit indicates fault as long as the button is activated.
- Over-temperature monitoring
- Broken wire detection in sensor circuit monitoring
- Short circuit detection in sensor circuit monitoring
- De-energized on trip
- LED-indicator for auxiliary supply and state of contact
- Output with 2 changeover contacts
应用
电机驱动与控制, 工业, 自动化与过程控制
可延期交货
筛选器工具