B57861S0303F040

The B57861S0303F040 is a 2-pin NTC Thermistor with epoxy resin encapsulation, PTFE-insulated leads of silver plated nickel wire (30AWG) and miniature sensors comes with bendable wires. This B57861S series through hole mounting thermistor features high measuring accuracy and short response time. A lead (wire) may be bent at a minimum distance of twice the wire's diameter plus 4mm from the component head or housing. When bending ensure the wire is mechanically relieved at the component head or housing. Twisting (torsion) by 180° of a lead bent by 90° is permissible at 6mm from the bottom of the thermistor body. Soldering can use resin-type flux or non-activated flux. The soldering due to insufficient preheating may cause ceramic cracks. Suitable for temperature measurement and heating systems.

• Bending radius should be at least 0.75mm
• Fast response time
• 60mW Maximum power

警告

请勿将热敏电阻存放在受热或阳光直射的地方. 请避免在储存和处理过程中污染热敏电阻表面. 请勿用手触摸组件.

注释

建议使用手套.