您已在下面突出显示的字段中输入包含无效字符的值。 请仅使用有效字符修改您的选择。

产品可能与您的搜索条件并不完全匹配

您买过此产品。 在订单历史记录中查看

 
 

FI-100

光纤测试套件, 250 /900µm与2/3mm适配器, 软便携包, 使用说明书, 太阳镜

TEMPO FI-100
×
×

图片仅用于图解说明,详见产品说明。

制造商:
TEMPO TEMPO
制造商产品编号:
FI-100
库存编号
2785031
技术数据表:
FI-100   Datasheet
查看所有技术文档

产品信息

想要查看类似产品?只需在下方选择所需属性并点击按钮 ×


:
250/900µm适配器, 2/3mm适配器, 软携带箱, 使用说明书, 太阳镜与两节AAA电池

:
-

查找类似产品 选择并修改以上属性即可查找类似产品。

技术文档 (1)

CAD 下载

×

条款

CAD Models - Notice
CAD Models and drawings are provided to you on a revocable limited licence for your internal use only but remain the property of the manufacturer who retain all intellectual property rights and ownership. They are provided to assist you in decision making and as design guide but are not guaranteed to be error free, accurate or up to date and is not intended to be taken as advice.
Use of these CAD models and other options provided are downloaded and used entirely at your own risk and by continuing you confirm acceptance of the above.

接受 取消

产品概述

The FI-100 from Greenlee Communications is a fibre identifier kit. It identifies fibre with a tone detect and clear indication of signal transmission direction. The FI-100 supports all common fibres including 250µm, 900µm, 2mm, 3mm and is able to sense light in bend insensitive fibres. The optical fibre identifier can quickly identify the direction of transmitted fibre and display relative core power without interrupting current service. It detects modulations of 270Hz, 1KHz and 2KHz with an audible tone and LED indication. There are 4 adaptor heads available: ø0.25/ribbon cable, ø0.9, ø2.0 and ø3.0. This tool is powered by two AAA alkaline batteries. The FI-100 allows the technician to quickly determine approximate core power and signal direction in a fibre optic cable without disconnecting fibre. A non-intrusive macrobend is created so that only a small insertion loss is created, thus the technician can probe fibres without causing an alarm condition.
  • Non intrusive low insertion loss prevents alarm condition
  • Easy operation, versatile and rugged, determines direction of light travel
  • Identified wavelength range from 800nm to 1700nm
  • Detector type is 1mm InGaAs, low induced insertion loss
  • Prevents technician from disconnecting critical services during troubleshooting, identification
  • Left and right LED signal indication
  • Signal power test (CW/0.9mm fibre) from -50 to +10dBm, signal frequency display for 270Hz/1KHz/2KHz
  • Insertion loss (typical/ maximum) is 0.3/0.8dB at 1310nm, 1.5/2.5dB at 1550nm
  • Operating temperature range from -10°C to +60°C
  • Dimension is 196 x 30.5 x 27mm, weight is 195g and CE, FCC certifications

内容

Optical fibre identifier, 1 set of adaptor heads (250µm/ribbon cable, 900µm, 2mm and 3mm), 2 AAA batteries, 1 instruction manual, Soft carry bag, Sun shield.

警告

使用时请佩戴护目镜. 如果纤维碎片与眼睛或皮肤接触, 可能会非常危险.

可延期交货

交付周期内将会有更多库存,大约为 22-3-28

由于市场条件的影响,交货时间仅供一般指导,可能会在短时间内发生变化

有货时请通知我

CNY4,630.24 ( CNY5,232.17  含增值税)

定价不可用。 请联系客户服务

包装规格:
每个
多件: 1 最低: 1
数量 单价(含增值税) 您所支付金额(含增值税)
 
 
1+ CNY4,630.24 (CNY5,232.17)
优惠价格
合约价格
仅限网络价格
仅限网络合约价格
  ( )
 
 

定价不可用。 请联系客户服务

No longer stocked:: No Longer Manufactured::
添加到购物篮 添加到购物篮 预订
添加
受限制物品
添加部件编号/注释行
总价:
总价: ( )
总价: --