6ED2230S12TXUMA1

6ED2230S12TXUMA1 is a three-phase gate driver with an integrated bootstrap diode and OCP. It is a high-voltage, high-speed IGBT with three independent high-side and low-side referenced output channels for three-phase applications. Proprietary HVIC and latch-immune CMOS technologies enable ruggedized monolithic construction. The logic input is compatible with standard CMOS or TTL outputs, down to 3.3V logic. An over-current protection (OCP) function that terminates all six outputs can also be derived from this resistor. An open drain FAULT signal is provided to indicate that an over-current or undervoltage shutdown has occurred. Fault conditions are cleared automatically after a delay programmed externally via an RC network. Typical application includes commercial and lite commercial air conditioning; CAC, HVAC, industrial drives, servo drives, embedded inverters for motor control in pumps, fans, and heat pumps.

• Infineon thin-film-SOI technology, fully operational to +1200V
• Low-side supply voltage range from 13 to 20V
• Integrated ultra‐fast bootstrap diode, floating channel designed for bootstrap operation
• Output source/sink current capability +0.35A/‐0.65A
• Tolerant to negative transient voltage up to -100V (Pulse width is up 700ns) given by SOI-technology
• Undervoltage lockout for both channels, shoot-through protection
• Turn-on propagation delay is 700ns typ (VCC=VBS= 15V, VS=COM, TA=25°C, CL=1000pF)
• Turn-off propagation delay is 650ns typ (VCC=VBS= 15V, VS=COM, TA=25°C, CL=1000pF)
• DSO-24 package, ambient temperature range from -40 to 125°C