TLE92464EDEVALBOARDTOBO1

TLE92464EDEVALBOARDTOBO1 is a TLE92464ED evaluation board (EVB) that provides a quick pick and place solution for costumer’s lab evaluations. The EVB comes with the Solenoid Driver TLE92464ED and all required external components. The EVB is designed on an Arduino form factor which makes it controlled by all Arduino compatible microcontroller boards, e.g. Infineon XMC1100 boot kit, Infineon XMC4700 relax kit, Aurix ShieldBuddy or Arduino Uno. Suitable for variable force solenoids (e.g. automatic transmission solenoids), other constant current solenoids such as Idle air control, exhaust gas recirculation, vapour management valve and suspension control.

• Integrated MOSFETs (RDSon = 115mohm) and 1% current control accuracy
• Programmable setpoint from 0mA to 1.5A and load current including dither 1.8A
• Current in parallel channel mode 2.7A and 15 bit current setpoint resolution
• Integrated system clock with clock watchdog and dither generator with frequency and waveform
• Integrated sense resistor RSHUNT = 140mohm and sophisticated protection&diagnostic function
• Excellent immunity to large load supply voltage changes
• Operation down to 3.5 V at VDD pin and 32 bit SPI with 8 bit CRC & SPI watchdog
• Enables ASIL D on system level, excellent battery ripple rejection, simplifies 6CH TLE92466ED use
• Utilize TLE92466ED for software reuse, scalable solution, integrated power devices
• Optimize PCB layout, current limitation, slew rate control, improved short-to-battery performance