您已在下面突出显示的字段中输入包含无效字符的值。 请仅使用有效字符修改您的选择。
产品可能与您的搜索条件并不完全匹配
您买过此产品。
在订单历史记录中查看
MCP4561-103E/MS
非易失性数字电位器, AEC-Q100, 10 kohm, 单, I2C, 串行, 线性, ± 20%, 2.7 V
- 制造商:
- MICROCHIP MICROCHIP
- 制造商产品编号:
- MCP4561-103E/MS
- 库存编号
- 1698948
- 技术数据表:
- MCP4561-103E/MS Datasheet
产品范围选择器 (Single 257-Tap Non-volatile Digital Pots)
查看全系列相关产品产品概述
The MCP4561-103E/MS is a single I²C Digital Potentiometer with non-volatile memory. It supports potentiometer wiper configuration and EE memory type. The SCL pin is the serial interfaces serial clock pin.
- 8-bit 256 resistors (257 Steps) resistor network resolution
- Four RAB resistances options - 5, 10, 50 and 100kR
- Zero to full-scale wiper operation
- 75R Typical low wiper resistance
- 50ppm typical (0 to 70°C) absolute (rheostat) low tempco
- 15ppm Typical ratiometric (potentiometer) low tempco
- Non-volatile memory - automatic recall of saved wiper setting
- WiperLock™ technology
- 10 general purpose memory locations
- High-speed read/write to wiper
- Read/write to EEPROM
- Write protect to be enabled/disable
- WiperLock to be enabled/disabled
- Resistor network terminal disconnect feature via terminal control (TCON) register
- Reset input pin
- Hardware write protect (WP) control pin
- Software write protect (WP) configuration bit
- 1.5V typical brown-out reset protection
- 2.5µA typical serial interface inactive current
- High-voltage tolerant digital inputs up to 12.5V
警告
ESD sensitive device, take proper precaution while handling the device.
产品信息
技术文档 (3)
可延期交货
×
您现在可以预订货品了 订购所需的数量并按正常方式结算。目前无法交付的数量将列入延期交货订单中,并在到货后立即发货。 只有在发货后才会收取您的费用。
将于 21-4-19 再提供 1,148 件
筛选器工具