EV6619L-Q-00A

EV6619L-Q-00A is a 2.5V to 28V, 5A, H-bridge motor driver evaluation board. The EV6619L-Q-00A evaluation board is designed to demonstrate the capabilities of the MP6619L, an H-Bridge motor driver. It operates from an input voltage (VIN) up to 28V and can deliver up to 5A of motor current. The MP6619L is typically used to drive a brushed DC motor. The MP6619L has a configurable current limit (ILIMIT). For simplicity, the output polarity can be controlled by pulling the IN1 and IN2 pins high or low.

• Wide 2.5V to 28V operating input voltage (VIN) range
• Up to 5A peak output current (IOUT) and compliance with 3.3V and 5V systems
• Internal H-bridge driver and configurable current limit (ILIMIT)
• 65mohm on resistance (RDS(ON)) for each half-bridge MOSFET with 5V VCC
• 100% duty cycle operation of H-bridge
• 1μA shutdown mode
• Overcurrent protection (OCP)
• VIN overvoltage protection (OVP)
• VCC undervoltage lockout (UVLO) protection
• Over-Temperature (OT) shutdown and fault indication output

注释

MPS part numbers ending in "-P" and "-Z" are the same parts. P & Z only indicates reel size.