EVKT-MP2722

EVKT-MP2722 is an evaluation kit for the MP2722. It is used to demonstrate the capabilities of the MP2722, a single-cell, 5A, narrow-voltage DC (NVDC) buck charger with USB Type-C dual-role power (DRP) detection and serial interface control. The device can accept a 4V to 16V input voltage (VIN) to charge the battery. The default function of this board is preset for charger mode, and the charge-full voltage is preset to 4.2V for a single-cell Li-ion battery.

• Fully integrated CC controller compliant with USB Type-C 1.3
• USB type-C dual-role power (DRP) with Try.SNK and Try.SRC mode support
• Supports USB BC 1.2 and Non-Standard Adapters
• 26V sustainable input voltage (VIN)
• Configurable 80mA to 5A charge current via the serial interface
• Configurable 100mA to 3.2A input current limit via the serial interface
• Minimum VIN loop for maximum adapter power tracking
• Configurable 750K to 1.5MHz fSW, ultra-low 8.5μA battery discharge current in shipping mode
• Serial interface port for flexible system parameter setting and status reporting
• Down to 30mA termination current settings for wearable applications

内容

EV2722-RH-00A MP2722 evaluation board, EVKT-USBI2C-02 includes one USB-to-I2C communication interface, one USB cable, one ribbon cable, Online resources include GUI and supplemental documents.

注释

MPS part numbers ending in "-P" and "-Z" are the same parts. P & Z only indicates reel size.