MP4313GRE-P

MP4313 is a configurable-frequency, synchronous, step-down switching converter with integrated internal high-side and low-side power MOSFETs (HS-FET and LS-FET, respectively). It can achieve up to 3A of highly efficient output current (IOUT) with current mode control for fast loop response. The wide 3.3V to 45V input voltage (VIN) range accommodates a variety of step-down applications in automotive input environments. High power conversion efficiency across the entire load range is achieved by scaling down switching frequency (fSW) under light-load conditions. This reduces switching and gate driver losses. An open-drain power good (PG) signal indicates whether output is within 95% to 105% of its nominal voltage. Thermal shutdown provides reliable, fault-tolerant operation. The MP4313 is available in a QFN-20 (4mmx4mm) package. Applications include radios, battery-powered systems, general-purpose consumer applications and industrial power systems.

• 1.7μA low shutdown current (ISD), 18μA sleep mode quiescent current (IQ)
• 48mohm/20mohm internal power MOSFETs
• High duty cycle and low-dropout mode are provided for automotive cold-crank conditions
• 350KHz to 1000KHz configurable switching frequency (fSW) for car battery applications
• Can be synchronized to an external clock, out-of-phase synchronized clock output
• Frequency spread spectrum (FSS) for low electromagnetic interference (EMI)
• Symmetric VIN for low EMI, power good (PG) output, external soft start (SS)
• 100ns minimum on time (tON-MIN), low-dropout (LDO) mode
• Selectable advanced asynchronous modulation (AAM) mode or forced continuous conduction mode (FCCM)
• Overcurrent protection (OCP) with hiccup mode, frequency foldback

注释

MPS part numbers ending in "-P" and "-Z" are the same parts. P & Z only indicates reel size.