您已在下面突出显示的字段中输入包含无效字符的值。 请仅使用有效字符修改您的选择。
产品可能与您的搜索条件并不完全匹配
您买过此产品。
在订单历史记录中查看
MULTICOMP PRO MP010809
3D 打印机灯丝，1.75 mm直径，乳白色，聚乳酸（PLA），210 °C 至 230 °C，1 kg
产品范围选择器 (Multicomp Pro Filament PLA)
查看全系列相关产品产品信息
技术文档 (1)
产品概述
MP010809 is a PLA+ filament for 3D printers. PLA+ is an environment-friendly material, which is easy to print and has smooth surface. PLA+ filament has good strength, rigidity, toughness balance, strong impact resistance, so pla plus is considered suitable for functional parts printing. pla+ is approved by FDA, safer to use, PLA pro can be used for modelling, rapid prototyping.
- Good toughness smooth printed surface, strong impact resistance easy to print
- High speed printing hard to break, density(g/cm3) is 1.23
- Heat distortion temperature (°C,0.45MPa) is 53, melt flow index (g/10min) is 5 (190°C/2.16kg)
- Tensile strength (MPa) is 63, durability is 4/10, printability is 9/10
- Extruder temperature range from 210°C to 230°C, recommended temperature is 215°C
- Fan speed is 100%, printing speed is 40mm/s to 100mm/s
- Recommended build surfaces is masking paper, PVP solid glue, PEI
- 1.75mm, milk white, 1kg
应用
3D打印, 3D设计, 业余爱好与教育用, 教育, 原型设计, 商业
筛选器工具