您已在下面突出显示的字段中输入包含无效字符的值。 请仅使用有效字符修改您的选择。
产品可能与您的搜索条件并不完全匹配
您买过此产品。
在订单历史记录中查看
NXP PN7150B0HN/C11002Y
RFID，NFC控制器，读，写，13.56 MHz，1.65 V至1.95 V，HVQFN-40
- 制造商：
- NXP NXP
- 制造商产品编号:
- PN7150B0HN/C11002Y
- 库存编号
- 2663167RL
-
- 技术数据表:
- PN7150B0HN/C11002Y 数据表
- ECAD / MCAD
-
产品概述
PN7150B0HN/C11002Y is a high performance NFC controller with integrated firmware, supporting all NFC forum modes. PN7150 is designed based on learnings from previous NXP NFC device generation. It is ideal solution for rapidly integrating NFC technology in any application, especially those running O/S environment like Linux and Android. PN7150 embeds a new generation RF contactless front-end supporting various transmission modes according to NFCIP-1 and NFCIP-2, ISO/IEC 14443, ISO/IEC 15693, MIFARE Classic IC-based card and FeliCa card specifications. It embeds an Arm Cortex-M0 microcontroller core loaded with the integrated firmware supporting the NCI 1.0 host communication. It also allows to provide a higher output power. Typical applications are TVs, set-top boxes, blu-ray decoders, audio devices, home automation, gateways, wireless routers, home appliances, wearables, remote controls, healthcare, fitness and printers, IP phones, gaming consoles, accessories.
- Arm Cortex-M0 microcontroller core and integrated RF level detector
- Highly integrated demodulator and decoder
- Buffered output drivers to connect an antenna with minimum number of external components
- Integrated polling loop for automatic device discovery
- Supported host interfaces: I2C-bus high-speed mode
- Integrated power management unit: direct connection to a battery (2.3V to 5.5V voltage supply range)
- Autonomous mode when host is shut down
- Support different hard power-down/standby states activated by firmware
- Automatic wake-up via RF field, internal timer and I2C-bus interface
- Integrated non-volatile memory to store data and executable code for customization
警告
该产品的市场需求较大, 导致交货时间延长。交货日期可能会有延迟。该产品不在折扣范围内。
产品信息
技术文档 (2)
24,221 有货 需要更多？
×
您现在可以预订货品了 订购所需的数量并按正常方式结算。目前无法交付的数量将列入延期交货订单中，并在到货后立即发货。
交付周期内有额外库存， 交付周期大约为 24-5-27
3,482 Shanghai 有库存，可在下一个工作日发货 （在 CST 下午 4.30 之前订购）
20,739 英国 有库存，可在 5-6 个工作日内发货
20,739 英国 有库存，可在 5-6 个工作日内发货
由于市场条件的影响，交货时间仅供一般指导，可能会在短时间内发生变化
- 10+
- 25+
- 100+
- 250+
- 500+
- 1000+
- 2000+
| 数量 | 价钱 (不含税) (含税) | 您所支付金额 (不含税) |
|---|---|---|
| 10+ | CNY64.10 CNY72.433 | ( ) |
| 25+ | CNY57.65 CNY65.1445 | ( ) |
| 100+ | CNY52.75 CNY59.6075 | ( ) |
| 250+ | CNY49.04 CNY55.4152 | ( ) |
| 500+ | CNY44.66 CNY50.4658 | ( ) |
| 1000+ | CNY41.33 CNY46.7029 | ( ) |
| 2000+ | CNY40.75 CNY46.0475 | ( ) |
| 数量 | 价钱 (不含税) (含税) | 您所支付金额 (不含税) |
|---|
定价不可用。 请联系客户服务。
10 (切割卷带 2663167) x 64.1 = CNY641.00
10 (切割卷带 2663167) x 72.433 = CNY724.33
总价: CNY641.00
( 不含税 )
总价: CNY724.33
( 含税 )
10 (复卷 2663167RL) x 64.1 = CNY641.00
10 (复卷 2663167RL) x 72.433 = CNY724.33
总价: CNY641.00
( 不含税 )
总价: CNY724.33
( 含税 )
选择您的包装首选项
筛选器工具