打印页面
NCV7710DQBR2G
继电器驱动器，AEC-Q100，5.5 V至28 V电源，SSOP-EP-36，150 °C
1,480 有货
需要更多？
1480 件可于 5-6 个工作日内送达(英国 库存)
| 数量 | 价钱 (含税) |
|---|---|
| 1+ | CNY62.890 (CNY71.0657) |
| 10+ | CNY42.270 (CNY47.7651) |
| 25+ | CNY36.860 (CNY41.6518) |
| 50+ | CNY33.820 (CNY38.2166) |
| 100+ | CNY30.770 (CNY34.7701) |
| 250+ | CNY29.480 (CNY33.3124) |
| 500+ | CNY28.440 (CNY32.1372) |
包装规格：单件（切割供应）
最低: 1
多件: 1
CNY62.89 (CNY71.07 含税)
品項附註
此订单的信息已添加到您的订单确认邮件、发票和发货通知中。
产品概述
NCV7710 is a door module driver (lock driver). It is a powerful Driver-IC for automotive body control systems. The IC is designed to control lock motor in the door of a vehicle. With the monolithic full-bridge driver stage, the IC is able to control lock motor. It is controlled thru a 24bit SPI interface with in-frame response. Its programmable soft-start function to drive loads with higher inrush currents as current limitation value. It is widely used in application such as de-centralized door electronic systems, automobiles, rear door electronic unit, body control units (BCUs), several H-bridge applications etc.
- Operating range from 5.5V to 28V
- Support of PWM control frequency outside the audible noise
- Support of active freewheeling to reduce power dissipation
- Multiplex current sense analogue output for advanced load monitoring
- Very low current consumption in standby mode
- Charge pump output to control an external reverse polarity protection MOSFET
- Protection against short circuit, overvoltage and overtemperature
- Number of drivers are 2, VCC is 5V maximum, ID is 6A maximum
- rDS(on) max is 0.3ohm, T max is 125°C
- Package style is SSOP-36EP
技术规格
输出电流
6A
电源电压最大值
28V
针脚数
36引脚
工作温度最高值
150°C
产品范围
-
电源电压最小值
5.5V
IC 外壳 / 封装
SSOP-EP
工作温度最小值
-
合规
AEC-Q100
SVHC(高度关注物质)
No SVHC (25-Jun-2025)
技术文档 (1)
法律与环境
原产地：
进行最后一道重要生产流程所在的地区原产地：Philippines
进行最后一道重要生产流程所在的地区
进行最后一道重要生产流程所在的地区原产地：Philippines
进行最后一道重要生产流程所在的地区
税则号：85423990
US ECCN:EAR99
EU ECCN:NLR
RoHS 合规：是
RoHS
RoHS 邻苯二甲酸盐合规:是
RoHS
SVHC:No SVHC (25-Jun-2025)
下载产品合规证书
产品合规证书
重量（千克）：.00017