PIM487

The Automation HAT Mini is a great solution for monitoring and controlling low voltage (12-24V) systems in homes and cars. All the inputs and outputs are 24V tolerant and it features a full colour IPS display to provide status feedback on your system.

• Full colour 0.96" IPS LCD display (160x80)
• 3x 12-bit Analogue inputs @0-24V (ADS1015)
• 3x 24V Tolerant buffered inputs
• 3x 24V Tolerant sinking inputs (outputs can sink a maximum 500mA total across the 3 outputs)
• 24V @2A Relay (NC & NO terminals)
• 3.5mm Screw terminals
• Additional breakout header on the underside for a Pimoroni breakout board
• Python software library available
• Mini HAT format board
• Solderless header is pre-attached
• Compatible with all Raspberry Pi models with 40-pin header
• Dimensions (HxWxD): 17x65x30mm

内容

Board only

警告

Note: Do not use the Automation HAT to switch mains voltages.

注释

Note: Loads for the outputs should be switched on the ground side. The relay can tolerate up to 2A each and should be switched on the high side.