RTKA223011DE0010BU

RAA223011 high voltage buck converter evaluation board is designed to demonstrate a low-cost high performance non-isolated AC/DC conversion from a universal input of 85VAC to 265VAC, to a 12V output with the output current up to 300mA. The board has built-in overcurrent, short-circuit, input brownout and overtemperature protection. The board is designed on a single side PCB with a single diode half-wave input rectification. It is pre-compliant with conducted and radiated EMI requirements by EN55022/CISPR 22. It comes with a RAA223011 in an 8 Ld SOIC package. Typical applications home appliances, home automation, IoT, sensors, metering, industry control and bias power.

• Universal input range
• Single-side PCB with low cost external components
• Standby power less than 10mW
• No audible noise
• Output current of 300mA max (at 230VAC or higher), output power of 3.6W
• Efficiency of <gt/>73% at 100% load, 80% at 50% load
• No-load power of 7mW at 120VAC and 9.6mW at 230VAC
• Load regulation of -2.4%, load range 10% to 100%
• Operating temperature range from -45°C to 65°C
• Board dimension of 40mm x 60mm