打印页面
产品概述
The BA4560YFVM-MGTR is an automotive low noise operational amplifier (op-amp) in 8 pin MSOP package. It integrates two independent op-amp on a single chip. This op-amp has some features of low noise and low distortion characteristics and can operate from ±4.0V to ±15V (split supply). The device is manufactured for automotive requirements of car navigation system, car audio etc.
- Automotive grade AEC-Q100 qualified
- High voltage gain, low noise and low distortion
- Wide operating supply voltage
- Internal ESD protection circuit
- Wide operating temperature range from -40°C to +105°C
- High slew rate of 4V/μs, input offset voltage of 0.5mV and input offset current of 5nA at 25°C
- Total harmonic distortion of 0.003% and maximum output voltage of ±12V at 25°C
- Input referred noise voltage of 8nV/Hz, input bias current of 50nA and supply current of 3mA at 25°C
- Large signal voltage gain of 100dB at 25°C
- CMRR of 70dB, PSRR of 76.5dB and 4MHz unity gain frequency at 25°C
警告
Electrostatic sensitive device, please take proper precautions while handling.
技术规格
通道数
2放大器
典型压摆率
4V/µs
IC 外壳 / 封装
MSOP
放大器类型
通用
输入偏移电压
500µV
芯片安装
表面安装
工作温度最高值
105°C
合规
AEC-Q100
SVHC(高度关注物质)
No SVHC (17-Jan-2023)
汽车质量标准
AEC-Q100
放大器数量
2个放大器
增益带宽积
-
电源电压范围
± 4V 至 ± 15V
针脚数
8引脚
轨至轨
-
输入偏置电流
50nA
工作温度最小值
-40°C
产品范围
-
湿气敏感性等级
MSL 1 -无限制
放大器封装类型
MSOP
带宽
-
摆率
4V/µs
法律与环境
原产地:
进行最后一道重要生产流程所在的地区原产地:Philippines
进行最后一道重要生产流程所在的地区
进行最后一道重要生产流程所在的地区原产地:Philippines
进行最后一道重要生产流程所在的地区
税则号:85423390
US ECCN:EAR99
EU ECCN:NLR
RoHS 合规:是
RoHS
RoHS 邻苯二甲酸盐合规:是
RoHS
SVHC:No SVHC (17-Jan-2023)
下载产品合规证书
产品合规证书
重量(千克):.000025