LMR376YG-CTR
运算放大器, 1 放大器, 3.2 MHz, 1.1 V/µs, 2.5V 至 5.5V, ± 1.25V 至 ± 2.75V, SSOP, 5 引脚
需要更多？
| 数量 | 价钱 (含税) |
|---|---|
| 1+ | CNY14.410 (CNY16.2833) |
| 10+ | CNY9.710 (CNY10.9723) |
| 50+ | CNY9.200 (CNY10.396) |
| 100+ | CNY8.670 (CNY9.7971) |
| 250+ | CNY8.160 (CNY9.2208) |
| 500+ | CNY7.870 (CNY8.8931) |
| 1000+ | CNY7.690 (CNY8.6897) |
| 2500+ | CNY7.500 (CNY8.475) |
产品信息
产品概述
LMR376YG-CTR is an automotive low offset low noise and rail-to rail input/output CMOS operational amplifier. This features low input offset voltage, low noise and low input bias current. It is suitable for automotive requirements such as engine control unit, electric power steering, anti-lock braking system, sensor amplifier, and so on. Application includes engine control unit, electric power steering (EPS), anti-lock braking system (ABS), automotive electronics, sensor amplifiers, battery-powered equipment, current monitoring amplifier, ADC front ends, buffer amplifier, photodiode amplifier, amplifiers.
- AEC-Q100 qualified (Grade 1)
- Low input offset voltage, low input referred noise voltage density
- 3.2MHz typical gain bandwidth product at G = 40dB
- 190μV input offset voltage max (no load, absolute value, VS = 5V, VSS = 0V, Ta = 25°C)
- Input-referred noise voltage density is 22nV/√Hz typ (f = 10Hz, VS = 5V, VSS = 0V, Ta = 25°C)
- Input bias current is 0.5pA (typ)
- Operating supply voltage range from 2.5 to 5.5V (single), ±1.25 to ±2.75V (dual)
- 1.1V/μs slew rate typ (RL = 10kohm, G = 0dB, VS = 5V, VSS = 0V, Ta = 25°C)
- 100dB common-mode rejection ratio typ (VICM = VSS to VDD, VS = 5V, VSS = 0V, Ta = 25°C)
- SSOP5 package, wide temperature range from -40°C to +125°C
技术规格
1放大器
1.1V/µs
SSOP
CMOS
5µV
表面安装
125°C
AEC-Q100
SSOP
3.2MHz
1.1V/µs
3.2MHz
2.5V 至 5.5V, ± 1.25V 至 ± 2.75V
5引脚
轨至轨输入/输出(RRIO)
0.5pA
-40°C
-
To Be Advised
AEC-Q100
1个放大器
技术文档 (1)
法律与环境
进行最后一道重要生产流程所在的地区原产地：Japan
进行最后一道重要生产流程所在的地区
RoHS
RoHS
产品合规证书