您已在下面突出显示的字段中输入包含无效字符的值。 请仅使用有效字符修改您的选择。
产品可能与您的搜索条件并不完全匹配
您买过此产品。
在订单历史记录中查看
C8051F120-GQ
8位 MCU微控制单元, 混合信号, C8051 Family C8051F12x Series Microcontrollers, 100 MHz, 128 KB, 8.25 KB, 100 引脚
产品范围选择器 (C8051 Family C8051F12x Series Microcontrollers)
查看全系列相关产品产品概述
The C8051F120-GQ is a Precision Analogue 8-bit Microcontroller Unit includes up to 128kB of on-chip Flash with 8kB of RAM. On-board JTAG debug circuitry allows non-intrusive, full speed, in-circuit debugging using the production MCU installed in the final application. This debug system supports inspection and modification of memory and registers, setting breakpoints, watch-points, single stepping, run and halt commands. All analogue and digital peripherals are fully functional while debugging using JTAG.
- High-speed pipelined 8051-compatible CIP-51 microcontroller core
- In-system, full-speed, non-intrusive debug interface (on-chip)
- True 12 or 10-bit 100ksps ADC with PGA and 8-channel analogue multiplexer
- True 8-bit 500ksps ADC with PGA and 8-channel analogue multiplexer
- Two 12-bit DACs with programmable update scheduling
- 2-cycle 16 by 16 Multiply and accumulate engine
- 128 or 64kB of In-system programmable flash memory
- 8448 (8k + 256) bytes of on-chip RAM
- External data memory interface with 64kB address space
- SPI, SMBus/I²C and (2) UART serial interfaces implemented in hardware
- Five general purpose 16-bit timers
- Programmable counter/timer array with 6 capture/compare modules
- On-chip watchdog timer, VDD monitor and temperature sensor
应用
传感与仪器
警告
Market demand for this product has caused an extension in leadtimes. Delivery dates may fluctuate. Product exempt from discounts.
产品信息
技术文档 (2)
CAD 下载
--请选择...
✔
--请选择...
×
条款
CAD Models - Notice
CAD Models and drawings are provided to you on a revocable limited licence for your internal use only but remain the property of the manufacturer who retain all intellectual property rights and ownership. They are provided to assist you in decision making and as design guide but are not guaranteed to be error free, accurate or up to date and is not intended to be taken as advice.
Use of these CAD models and other options provided are downloaded and used entirely at your own risk and by continuing you confirm acceptance of the above.
畅销品
60 有货 需要更多？
×
您现在可以预订货品了 订购所需的数量并按正常方式结算。目前无法交付的数量将列入延期交货订单中，并在到货后立即发货。
将于 22-3-24 再提供 90 件
交付周期内有额外库存， 交付周期大约为 22-8-1
60 UK 有库存，可在 4-5 个工作日内发货
由于市场条件的影响，交货时间仅供一般指导，可能会在短时间内发生变化
筛选器工具