有货时请通知我
数量 | 价钱 (含税) |
---|---|
1+ | CNY179.320 (CNY202.6316) |
5+ | CNY175.810 (CNY198.6653) |
10+ | CNY172.290 (CNY194.6877) |
25+ | CNY168.780 (CNY190.7214) |
50+ | CNY165.270 (CNY186.7551) |
产品信息
产品概述
The LMC6001AIN/NOPB is an ultra-low input Current Amplifier Featuring 100% tested input currents of 25fA maximum, low operating power and ESD protection of 2000V, this amplifier achieves a new industry benchmark for low input current operational amplifier. To avoid long turn-on settling times common in other low input current op amps, the amplifier is tested three times in the first minute of operation. Even units that meet the 25fA limit are rejected if they drift. Because of the ultra-low input current noise of 0.13fA/√Hz, the amplifier can provide almost noiseless amplification of high resistance signal sources. Adding only 1dB at 100kΩ, 0.1dB at 1MΩ and 0.01dB or less from 10MΩ to 2,000MΩ, the LMC6001 is an almost noiseless amplifier. Because input referred noise is only 22nV/√Hz, this amplifier can achieve higher signal to noise ratio than JFET input type electrometer amplifiers.
- 22nV/√Hz at 1kHz Typical low noise
- 750µA Low power
- 2pA Input current over-temperature
- Green product and no Sb/Br
警告
This device has limited built-in ESD protection, leads should be shorted together or the device placed in conductive foam during storage or handling to prevent electrostatic damage to the MOS gates.
注释
This device has limited built-in ESD protection, leads should be shorted together or the device placed in conductive foam during storage or handling to prevent electrostatic damage to the MOS gates.
技术规格
1放大器
1.5V/µs
DIP
低功耗
1.35mV
通孔安装
85°C
-
No SVHC (27-Jun-2018)
-
1个放大器
1.3MHz
4.5V 至 15.5V
8引脚
轨至轨输出(RRO)
0.1pA
-40°C
-
MSL 1 -无限制
DIP
1.3MHz
1.5V/µs
技术文档 (1)
法律与环境
进行最后一道重要生产流程所在的地区原产地:Malaysia
进行最后一道重要生产流程所在的地区
RoHS
RoHS
产品合规证书