需要更多?
数量 | 价钱 (含税) |
---|---|
1+ | CNY21.070 (CNY23.8091) |
10+ | CNY21.050 (CNY23.7865) |
25+ | CNY21.030 (CNY23.7639) |
50+ | CNY21.000 (CNY23.730) |
100+ | CNY20.980 (CNY23.7074) |
250+ | CNY20.950 (CNY23.6735) |
500+ | CNY20.930 (CNY23.6509) |
1000+ | CNY20.890 (CNY23.6057) |
产品信息
产品概述
The LMC6484IN/NOPB is a CMOS quad rail-to-rail input and output Operational Amplifier provides a common-mode range that extends to both supply rails. This rail-to-rail performance combined with excellent accuracy, due to a high CMRR, makes it unique among rail-to-rail input amplifiers. It is ideal for systems, such as data acquisition, that require a large input signal range. The LMC6484 is also an excellent upgrade for circuits using limited common-mode range amplifiers such as the TLC274 and TLC279. Maximum dynamic signal range is assured in low voltage and single-supply systems by the rail-to-rail output swing of the LMC6484. The rail-to-rail output swing of the LMC6484 is ensured for loads down to 600Ω. Specified low voltage characteristics and low power dissipation make the LMC6484 especially well-suited for battery-operated systems.
- Rail-to-rail input common-mode voltage range (specified over-temperature)
- Rail-to-rail output swing (within 20mV of supply rail, 100kΩ load)
- Specified for 2kΩ and 600Ω loads
- 82dB Excellent CMRR and PSRR
- 20fA Ultra low input current
- 130dB High voltage gain (RL=500kΩ)
警告
该设备内置静电防护措施有限, 存放时引线应短接在一起, 或将设备放置在导电泡沫中, 以防止静电对MOS门造成损坏.
注释
Device has limited built-in ESD protection. The leads should be shorted together or the device placed in conductive foam during storage or handling to prevent electrostatic damage to the MOS gates.
技术规格
4放大器
1.3V/µs
DIP
CMOS
110µV
通孔安装
85°C
-
No SVHC (27-Jun-2018)
-
4个放大器
1.5MHz
3V 至 15.5V
14引脚
轨至轨输入/输出(RRIO)
0.02pA
-40°C
-
MSL 1 -无限制
DIP
1.5MHz
1.3V/µs
技术文档 (1)
法律与环境
进行最后一道重要生产流程所在的地区原产地:United States
进行最后一道重要生产流程所在的地区
RoHS
RoHS
产品合规证书