221002

Ultrafuse® polyoxmethylen based support layer filament developed to be used in combination with Ultrafuse® metal filaments. When printed between support and the object, it creates a barrier during sintering and facilitates the separation of support from the metal part. Ultrafuse® support layer is not developed to print stand-alone parts and should be printed as a layer attached to the support structures in dual extrusion prints.

• Spool size is 0.3Kg
• Outer diameter is 200mm
• Inner diameter is 50.5mm
• Width is 55mm

注释

Stored at 15 - 25°C in its originally sealed package in a clean and dry environment. If the recommended storage conditions are observed the products will have a minimum shelf life of 12 months.