您已在下面突出显示的字段中输入包含无效字符的值。 请仅使用有效字符修改您的选择。
产品可能与您的搜索条件并不完全匹配
您买过此产品。
在订单历史记录中查看
CGD12HBXMP
评估板, 栅极驱动器用于XM3碳化硅模块, 1.2kV
产品概述
Form factor fitting, dual channel differential isolated gate driver tool optimized for the high performance XM3 SiC half bridge power modules. Each of the two gate drive channels is protected against overcurrent and reverse polarity. The on-board 2W isolated power supplies support 80KHz switching frequency. Typical applications include motor and traction drives, UPS, EV chargers, industrial automation & testing, power supplies.
- High frequency, ultra-fast switching operation
- DC bus voltage up to 1000V
- Primary OVLO and UVLO with hysteresis
- User configurable turn-on and turn-off gate resistors enabling switching loss optimization
- Supply voltage range from 10.2V to 13.2V
- Differential inputs for increased noise immunity
- Very low isolation capacitance (<5pF) and 100KV/µs common-mode transient immunity (CMTI)
- Fault and power indicator LEDs for instant visual feedback
内容
Fully assembled gate driver PCB board, Reference design files.
产品信息
技术文档 (1)
CAD 下载
--请选择...
✔
--请选择...
×
条款
CAD Models - Notice
CAD Models and drawings are provided to you on a revocable limited licence for your internal use only but remain the property of the manufacturer who retain all intellectual property rights and ownership. They are provided to assist you in decision making and as design guide but are not guaranteed to be error free, accurate or up to date and is not intended to be taken as advice.
Use of these CAD models and other options provided are downloaded and used entirely at your own risk and by continuing you confirm acceptance of the above.
畅销品
8 有货 需要更多？
×
您现在可以预订货品了 订购所需的数量并按正常方式结算。目前无法交付的数量将列入延期交货订单中，并在到货后立即发货。
交付周期内有额外库存， 交付周期大约为 22-7-18
8 UK 有库存，可在 4-5 个工作日内发货
由于市场条件的影响，交货时间仅供一般指导，可能会在短时间内发生变化
筛选器工具