您已在下面突出显示的字段中输入包含无效字符的值。 请仅使用有效字符修改您的选择。
产品可能与您的搜索条件并不完全匹配
您买过此产品。
在订单历史记录中查看
ONSEMI NC7SZ175P6X
触发器, 非反相, 正沿, D, 2.6 ns, 175 MHz, 32 mA, SC-70, 6 引脚
产品概述
The NC7SZ175P6X is a single positive edge-triggered D-type CMOS Flip-flop with asynchronous clear from ultra-high-speed series of TinyLogic®. The device is fabricated with advanced CMOS technology to achieve ultra-high-speed with high output drive while maintaining low static power dissipation over a very broad VCC operating range. The device is specified to operate over the 1.65 to 5.5V VCC range. The inputs and output are high impedance when VCC is 0V. Inputs tolerate voltages up to 7V independent of VCC operating voltage. This single flip-flop will store the state of the D input that meets the setup and hold time requirements on the low-to-high clock transition. A low input to Clear sets the Q output to low level. The Clear input is independent of clock.
- Power down high impedance inputs/output
- Proprietary noise/EMI reduction circuitry implemented
- Overvoltage tolerant inputs facilitate 5 to 3V translation
- Matches the performance of LCX when operated at 3.3V VCC
警告
Market demand for this product has caused an extension in leadtimes. Delivery dates may fluctuate. Product exempt from discounts.
产品信息
技术文档 (4)
4,600 有货 需要更多？
×
您现在可以预订货品了 订购所需的数量并按正常方式结算。目前无法交付的数量将列入延期交货订单中，并在到货后立即发货。
交付周期内有额外库存， 交付周期大约为 24-9-2
4,600 Shanghai 有库存，可在下一个工作日发货 （在 CST 下午 4.30 之前订购）
由于市场条件的影响，交货时间仅供一般指导，可能会在短时间内发生变化
- 5+
| 数量 | 价钱 (不含税) (含税) | 您所支付金额 (不含税) |
|---|---|---|
| 5+ | CNY3.29 CNY3.7177 | ( ) |
| 数量 | 价钱 (不含税) (含税) | 您所支付金额 (不含税) |
|---|
定价不可用。 请联系客户服务。
5 (切割卷带 2453032) x 3.29 = CNY16.45
5 (切割卷带 2453032) x 3.7177 = CNY18.5885
总价: CNY16.45
( 不含税 )
总价: CNY18.59
( 含税 )
选择您的包装首选项
筛选器工具