您已在下面突出显示的字段中输入包含无效字符的值。 请仅使用有效字符修改您的选择。
产品可能与您的搜索条件并不完全匹配
您买过此产品。
在订单历史记录中查看
FT4233HPQ-TRAY
接口桥接器, USB至UART/MPSSE, 1.08 V, 1.32 V, QFN, 76 引脚, -40 °C
产品概述
FT4233HP is a hi-speed USB device with a Type-C/PD3.0 controller that fully supports the latest USB Type-C and Power Delivery (PD) standards enabling support for power negotiation with the ability to sink or source current to a USB host device. The USB bridge function delivers 4 independent channels compatible with the existing FT4232H quad hi-speed USB to multipurpose UART/MPSSE solution. Port 1 mode configuration for sink or dual-role. Port 2 works as sink, supporting charge through to port 1. Supports 5V3A, 9V3A, 12V3A, 15V3A and 20V3A PDOs as sink or source. PD policy engine using 32bit RISC controller with 8KB data RAM and 48KB code ROM. PD mode configuration through external EEPROM. USB 2.0 high speed (480Mbits/second) and full speed (12Mbits/second) compatible. Two multi-protocol synchronous serial engine (MPSSE) on channel A and channel B, to simplify synchronous serial protocol (USB to JTAG, I2C, SPI or bit-bang) design.
- Supports the PD specification Rev 3.0
- Type-C/PD physical layer protocol
- Options to use external MCU controlling PD policy through I2C interface
- USB to quad serial ports with a variety of configurations
- Entire USB protocol handled on the chip, no USB specific firmware programming required
- Extended -40°C to 85°C industrial operating temperature rang
- 3.3V single supply operating voltage range, +3.3V I/O interfacing
- Dedicated Windows/Linux DLLs available for USB to SPI, and USB to I2C applications
- USB bulk data transfer mode (512 byte packets in high speed mode)
- Configurable I/O drive strength (4, 8, 12 or 16mA) and slew rate
警告
Market demand for this product has caused an extension in leadtimes. Delivery dates may fluctuate. Product exempt from discounts.
产品信息
技术文档 (1)
CAD 下载
--请选择...
✔
--请选择...
×
条款
CAD Models - Notice
CAD Models and drawings are provided to you on a revocable limited licence for your internal use only but remain the property of the manufacturer who retain all intellectual property rights and ownership. They are provided to assist you in decision making and as design guide but are not guaranteed to be error free, accurate or up to date and is not intended to be taken as advice.
Use of these CAD models and other options provided are downloaded and used entirely at your own risk and by continuing you confirm acceptance of the above.
畅销品
可延期交货
由于市场条件的影响，交货时间仅供一般指导，可能会在短时间内发生变化
| 数量 | 价钱 (不含税) (含税) | 您所支付金额（含增值税） (不含税) |
|---|---|---|
| 1+ | CNY89.95 CNY101.64 | ( ) |
| 10+ | CNY86.38 CNY97.61 | ( ) |
| 25+ | CNY85.33 CNY96.42 | ( ) |
| 50+ | CNY80.78 CNY91.28 | ( ) |
定价不可用。 请联系客户服务。
筛选器工具