OPA453FAKTWT
运算放大器, 1 放大器, 7.5 MHz, 23 V/µs, ± 10V 至 ± 40V, TO-263 (D2PAK), 7 引脚
需要更多？
| 数量 | 价钱 (含税) |
|---|---|
| 10+ | CNY49.150 (CNY55.5395) |
| 25+ | CNY45.560 (CNY51.4828) |
| 50+ | CNY43.620 (CNY49.2906) |
| 100+ | CNY41.680 (CNY47.0984) |
| 250+ | CNY39.730 (CNY44.8949) |
| 500+ | CNY38.610 (CNY43.6293) |
产品信息
产品概述
The OPA453FAKTWT is a single Operational Amplifier with high-voltage (80V) and high-current capabilities (50mA). The OPA452 is unity-gain stable and has a gain bandwidth product of 1.8MHz, whereas the OPA453 is optimized for gains greater than 5 and has a 7.5MHz bandwidth. It is internally protected against over-temperature conditions and current overloads. Power supplies in the range of ±10 to ±40V can be used. Unlike most other power op amp, the OPA453 has ensured specifications over the entire power-supply range. These laser-trimmed, monolithic integrated circuits provide excellent low-level accuracy along with wide output swing. Special design considerations assure that the product is easy to use and free from phase inversion problems often found in other amplifiers.
- Fully protected - Thermal shutdown and output current-limited
- 50mA Continuous high output load drive
- 1V to rail Wide output voltage swing
- 5μV/°C Typical offset drift
- 94dB Typical CMRR
- Green product and no Sb/Br
技术规格
1放大器
23V/µs
TO-263 (D2PAK)
精度
1mV
表面安装
125°C
-
No SVHC (27-Jun-2018)
-
1个放大器
7.5MHz
± 10V 至 ± 40V
7引脚
-
7pA
-40°C
-
MSL 3 - 168小时
TO-263 (D2PAK)
7.5MHz
23V/µs
法律与环境
进行最后一道重要生产流程所在的地区原产地：Malaysia
进行最后一道重要生产流程所在的地区
RoHS
RoHS
产品合规证书